We are not the manufacturer, authorised distributor or authorised representative of the Wenglor brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Wenglor Y1TA100MHT88, connect FAMAGA, the world's prime supplier of streamlined equipment. Our company has advanced for more than ten years - these are cycles of experience, which are portrayed in the quality of outputs and special attention to each buyer. We respect everyone, who cooperated with us - therefore, our regular buyers bring in the most convenient purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Dominican Republic, Finland, Uruguay, Romania, Philippines, Guatemala, Yemen, Saudi Arabia, Morocco, Palestine, Ireland, Grenada, Kuwait, Liberia, Uganda, Nepal, Malaysia, Niger, Brunei, Turkey, Mauritania, Belize, Togo, Cameroon, Slovakia, The Bahamas, Central African Republic, Angola, Kyrgyzstan, Albania, Serbia, Botswana, Rwanda, Swaziland, Mexico, Nigeria, Afghanistan, Comoros, Cyprus, Croatia, Samoa, Zimbabwe, Indonesia, Burkina Faso. A well-elaborated logistics system and a partnership network allow us to send our products anywhere in the world as soon as possible without damaging product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only experts, who already have experience in the sphere of manufacturing equipment.
All goods from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more exceptional and technologically advanced industrial equipment so as keep on top of it.
To get some advice or order, phone us or send a message to the online chat on our official website. You can also send a list of the necessary equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working Range | 0,1...10,1 m |
Measuring Range | 10 m |
Resolution | 1...12 mm |
Linearity (Working Range 0,1...5 m) | 0,05 % |
Linearity (Working Range 5...10,1 m) | 0,2 % |
Switching Hysteresis | 3...20 mm |
Light Source | Laser (red) |
Wavelength | 660 nm |
Service Life (T = +25 °C) | 100000 h |
Laser Class (EN 60825-1) | 2 |
Max. Ambient Light | 10000 Lux |
Beam Divergence | < 2 mrad |
Light Spot Diameter | see Table 1 |
Reflector required | no |
Supply Voltage | 18...30 V DC |
Current Consumption (Ub = 24 V) | < 100 mA |
Switching Frequency | 50 Hz |
Measuring Rate | 1...100 /s |
On-/Off-Delay | 0...10000 ms |
Temperature Drift (-10 °C < Tu < 50 °C) | < 0,2 mm/K |
Temperature Drift (Tu 50 °C) | < 0,4 mm/K |
Temperature Range | -25...60 °C |
Number of Switching Outputs | 1 |
Switching Output Voltage Drop | < 2,5 V |
Switching Output/Switching Current | 200 mA |
Analog Output | 0...10 V/4...20 mA |
Short Circuit Protection | yes |
Reverse Polarity and Overload Protection | yes |
Interface | RS-232 |
Protection Class | III |
FDA Accession Number | 0710891-002 |
Setting Method | Menu (OLED) |
Housing Material | Plastic |
Degree of Protection | IP68 |
Connection | M12 ? 1, 8-pin |
MTTFd (EN ISO 13849-1) | 345,73 a |
Error Output | yes |
Configurable as PNP/NPN/Push-Pull | yes |
Analog Output | yes |
RS-232 Interface | yes |