We are not the manufacturer, authorised distributor or authorised representative of the Telco brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Telco SMR 6306 TS T3 , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of products and particular attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular purchasers obtain the most favorable purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, Qatar, Gambia, Honduras, Congo, Bahrain, Italy, Norway, Mongolia, Bolivia, Croatia, Bulgaria, Cameroon, Russia, Samoa, Uzbekistan, Burma, Czech Republic, South Sudan, Burundi, Eritrea, Hungary, Peru, Armenia, Cape Verde, Ukraine, The Gambia, Latvia, The Bahamas, Zimbabwe, Nicaragua, Panama, Benin, Kazakhstan, Brunei, Guatemala, Sweden, Paraguay, Swaziland, Philippines, Pakistan, Comoros, Mozambique, United Arab Emirates. A well-shaped logistics bond and a partnership network let us to ship our units anywhere in the world promptly without damaging product quality.
A particular source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only experts, who already have experience in the field of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that purchasers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Operation Mode | Thru Beam |
Function | Receiver |
Supply Voltage | 10 - 32 V dc |
Sensing Range | 6 m |
Output | PNP |
Output Status | N.O. |
Housing | M12 x 1 |
Housing Material | Stainless Steel |
Connection | 3 pin, M8 plug |
Supply Voltage | 10 - 32 V dc |
Voltage Ripple | 15 % |
Reverse Polarity Protected | Yes |
Short Circuit Protected | Yes |
Current Consumption | Max. 320 mW |
Max. Output Load | 100 mA |
Max. Residual Voltage | 2,5 V |
Max. Operation Frequency | 100 Hz |
Response Time ton / toff | 5 ms / 5 ms |
Output Indicator | Yellow LED |
Hysteresis | Approx. 30 % |
Opening Angle | +/- 6° |
Housing Material, Front Lens | Polycarbonate |
Housing Material, Sensor Housing | Stainless Steel (AISI 316 / 1.4401) |
Cable | 3/4 x 0,14 mm² |
Cable Sleeve | PVC Ø 4,0 mm |
Vibration | 10 - 55 Hz, 0.5 mm |
Shock | 30 g |
Operation Temperature | -20 to +60 °C |
Storage Temperature | -40 to +80 °C |
Sealing Class | IP 67 |
Light Immunity 5˚ | > 50 000 lux |