We are not the manufacturer, authorised distributor or authorised representative of the Telco brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are looking for Telco SMP 8501 MG T3 12880, get in touch with FAMAGA, the world's foremost supplier of mechanized equipment. Our company has operated for more than ten years - these are cycles of experience, which are depicted in the quality of outputs and particular attention to each orderer. We understand everyone, who engaged with us - thus, our regular purchasers receive the most acceptable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 650 contracts are concluded per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Austria, Bangladesh, Moldova, Japan, Malawi, Estonia, Monaco, Congo, Ghana, Comoros, Iran, Bhutan, Ukraine, Azerbaijan, Central African Republic, Liberia, Angola, Netherlands, Panama, Libya, Benin, Bulgaria, Togo, Malta, Niger, Costa Rica, Brunei, Belize, Vietnam, Denmark, Syria, El Salvador, Tonga, Slovakia, Bosnia and Herzegovina, Ireland, Iraq, Zambia, Andorra, Namibia, Norway, India, Burkina Faso. A well-built logistics network and a partnership network let us to ship our units anywhere in the earth promptly without damaging product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of factory-made equipment.
All products from FAMAGA are assured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been shipped, and this quantity is amounting every day. We are pleased that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To ask a question or book, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a made commercial proposal from FAMAGA.
Operation Mode | Diffuse Proximity |
Function | Both |
Supply Voltage | 10 - 30 V dc |
Light Source | Infrared (880 nm) |
Control Feature | Sensitivity pot. and light/dark switch |
Sensing Range | 1 m |
Output | PNP |
Output Status | N.C./N.O. |
Housing | M18 x 1 |
Housing Material | Stainless Steel |
Connection | 3 pin, M8 plug |
Supply Voltage | 10 - 30 V dc |
Voltage Ripple | 15 % |
Reverse Polarity Protected | Yes |
Short Circuit Protected | Yes |
Current Consumption | 14 mA |
Max. Output Load | 120 mA / 30 V dc |
Max. Residual Voltage | 1,5 V |
Max. Operation Frequency | 250 Hz |
Response Time ton / toff | 2 ms / 2 ms |
Power On Indicator | Green LED |
Output Indicator | Yellow LED |
Hysteresis | Approx. 5 - 15 % |
Opening Angle | +/- 4° |
Housing Material, Front Lens | Polycarbonate |
Housing Material, Sensor Housing | Stainless Steel (AISI 316 / 1.4401) |
Vibration | 10 - 55 Hz, 0,5 mm |
Shock | 30 g |
Operation Temperature | -20 to +60 °C |
Storage Temperature | -40 to +80 °C |
Sealing Class | IP 67 |
Light Immunity 15˚ | > 40 000 lux |