We are not the manufacturer, authorised distributor or authorised representative of the Pulsotronic brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pulsotronic
Country
Germany
Name
KJ8-M18MN61-ANU-V2
Part number
8317144765
Category
Inductive Sensors
Type
Inductive sensor
Stock availability:
On request
If you are inspecting Pulsotronic KJ8-M18MN61-ANU-V2 8317144765, reach FAMAGA, the world's the best producer of mechanized equipment. Our company has operated for more than ten years - these are years of experience, which are outlined in the quality of products and special attention to each purchaser. We admire everyone, who collaborated with us - so, our regular consumers pick up the most helpful purchase conditions and discounts on the manufacturing equipment market. Nowadays, there are more than 3500 such purchasers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Guinea, Liberia, Bulgaria, Cape Verde, South Africa, Czech Republic, Kuwait, Burma, Tonga, Grenada, Fiji, Uzbekistan, Bangladesh, Madagascar, Bolivia, Switzerland, Slovakia, United Arab Emirates, Australia, New Zealand, Burundi, Egypt, Armenia, Sweden, Turkmenistan, Kazakhstan, Uganda, Botswana, Iceland, United States, Senegal, Tunisia, Mongolia, Lithuania, Haiti, Cameroon, Mozambique, Brazil, Israel. A well-developed logistics connection and a partnership network cheer us to send our products anywhere in the world quickly without disreputing product quality.
A special source of good name for FAMAGA is its employees, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been delivered, and this quantity is rising every day. We are pleased that buyers choose FAMAGA again and again, and we are pleased to make more developed and technologically modern industrial equipment so as stay in control.
To inquire or order, get in touch with us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Product Description | inductive sensor analogue |
Name | KJ8-M18MN61-ANU-V2 |
Order number | 08317144765 |
Switching distance | from 1 mm to 8 mm |
Mounting | non shielded |
Switch type | analog |
Signal Type | Analog Voltage |
Connection | connector M12 |
Connection diagramm | |
Dimension (in mm) | fine-pitch thread M18 x 61 |
Technical Specification | |
Special features | Output Voltage 1 ... 9 Volt |
Operating voltage | 11 - 35 VDC |
Max. ripple | ≤ 10 % |
No load current | ≤ 5 mA |
Switching frequency | 400 Hz |
Operating temperature | -25 ° C to 70 ° C |
Temperature drift | +/-5 % |
Repeat accuracy | ≤ 1 % |
Linearity | ≤ 5% |
Analog output | Pulso_has1 |
Time delay | 300 ms |
Resolution | 1,143 V / mm |
Reverse voltage protection | yes |
Protection category | IP67 |
EMC-level | DIN EN 60947-5-7:2004-06 |
Housing material | Brass, nickel plated |
Material active face | PCB |
Utilisation category | DC 13 |
Contact material | CuSn |
Contact surface material | NiAu |
Contact holder | PA 6 |
Nominal operating voltage | 24 V DC |
Termination | Connector M12 4pin |
internal load | > 1 kOhm |
FIT / MTTF acc. to SIEMENS 29500 | 89,13 / 1281y |
Errors and omissions exceptet |