We are not the manufacturer, authorised distributor or authorised representative of the Pulsotronic brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Pulsotronic
Country
Germany
Name
KJ14-M30MN80-ANU 4BIT
Part number
8317141000
Category
Inductive Sensors
Type
Inductive sensor
Stock availability:
On request
Product Description | inductive sensor analogue |
Name | KJ14-M30MN80-ANU-4BIT |
Order number | 08317141000 |
Matchcode | 9914-1000 |
Switching distance | from 7 mm to 14 mm |
Mounting | non shielded |
Switch type | analog voltage |
Signal Type | Analog Voltage |
Connection | Cable |
Connection diagramm | |
Dimension (in mm) | fine-pitch thread M30 x 80 |
Technical Specification | |
Special features | Output Voltage 1 ... 9 Volt additional 4-Bit digital NPN-Output |
Operating voltage | 18 - 30 VDC |
Max. ripple | ≤ 5 % |
No load current | ≤ 10 mA |
Switching frequency | 30 Hz |
Operating temperature | -25 ° C to 70 ° C |
Temperature drift | +/- 8 % |
Repeat accuracy | ≤ 1 % |
Linearity | ≤ 3 % |
Digital output | 4-Bit digital NPN Output: Grey = Q3 yellow = Q2 purple = Q1 green = Q0 |
Time delay | 300 ms |
Resolution | 1,143 V / mm |
Reverse voltage protection | yes |
Protection category | IP67 |
EMC-level | DIN EN 60947-5-7:2004-06 |
Housing material | Brass, nickel plated |
Material active face | PCB |
Cable length | 2 m |
Utilisation category | DC 13 |
Cable material | PVC LIY-LIYC-Y Scree |
Nominal operating voltage | 24 V DC |
Cable cross | 6x 0.14 mm² + S |
internal load resistor | <= 500 Ohm |
FIT / MTTF acc. to SIEMENS 29500 | 218,35 / 523y |
Errors and omissions exceptet |