We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
LS4ER/30-105F
Category
Safety sensors
Description
T4-PLe 3cm h=106cm 12m,slave F
Stock availability:
On request
If you are inspecting MD Micro Detectors LS4ER/30-105F, contact FAMAGA, the world's top company of factory-made equipment. Our company has operated for more than ten years - these are years of experience, which are portrayed in the quality of products and private attention to each purchaser. We appreciate everyone, who joined with us - thus, our regular consumers accept the most favorable purchase forms and discounts on the manufacturing equipment market. At this time, there are more than 4500 such purchasers, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the earth Germany, United Kingdom, Sri Lanka, Canada, Guinea-Bissau, Mauritania, Cuba, Zimbabwe, Andorra, South Korea, Guyana, Afghanistan, Kazakhstan, Bhutan, Sudan, Morocco, Eritrea, Malta, Antigua and Barbuda, Israel, Costa Rica, Croatia, Pakistan, Indonesia, Mozambique, Djibouti, Turkey, Mauritius, Austria, Monaco, Peru, Vietnam, Sweden, Dominica, South Sudan, Switzerland, Czech Republic, Comoros, Tajikistan, Qatar, Suriname, Angola, Burkina Faso, Greece, Benin, Rwanda. A well-built logistics connection and a partnership network guide us to dispatch our units anywhere in the world immediately without discrediting product quality.
A particular source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only professionals, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are guaranteed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is increasing every day. We are proud that clients choose FAMAGA again and again, and we are eager to make more exceptional and technologically advanced industrial equipment so as not to lower the bar.
To consult or order, phone us or send a message to the online chat on our official website. You can also forward a list of the needful equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Distanza di rilevazione nominale | ? 12m |
Altezza controllata | 1060mm |
Numero di raggi | 53 |
Angolo di apertura effettivo | ±5° |
Principio di funzionamento | Emettitore + Ricevitore |
Tipo | 4 |
SIL | 3 |
SILCL | 3 |
PL | e |
PFHd | 1,43E-08 |
Dcavg | 97,70% |
MTTFd | 100 |
CFF | 80% |
Tipo di uscita | 2 x PNP-NO (uscite di sicurezza OSSD) |
Tempo di risposta | 14ms |
Tempo di risposta (Master + Slave) | T=[0,11*(Tslave+Tmaster)+0,9376]*2 |
Tempo di risposta (Master + 2 Slave) | T=[0,11*(Tslave1+Tslave2+Tmaster)+1,0508]*2 |
Tensione di alimentazione | 19,2 … 28,8 Vcc |
Corrente di carico | ? 400mA |
Ritardo alla disponibilita | 2s |
Immunita alla luce ambiente | secondo IEC 61496-2 |
Potenza assorbita - Ricevitore | 2W (senza carico) |
Potenza assorbita - Emettitore | 1W |
Carico resistivo equivalente | ? 60 ? |
Carico capacitivo tollerato | ? 0,82 µF |
Lunghezza cavi (Alimentazione/Uscita) | ? 100m |
Lunghezza cavi intermedi (Prolunghe) | ? 50m |
Dimensioni | 28mm (fronte) x 30mm |
Connessioni | M12-5 poli (Emettitore) M12-5 poli (Ricevitore) |
Temperatura operativa | -10°C ? +55°C (senza condensa) |
Temperatura di stoccaggio | -25°C ? +70°C (senza condensa) |
Umidita | 95% (senza condensa) |
Certificazioni | CE, cULus, TUV |
Compatibilita elettromagnetica | Secondo la Direttiva 2014/30/EU |
Urti e vibrazioni | secondo IEC 61496-1 |
Grado di Protezione | IP65, IP67 |
Accessori inclusi | ST 204 4S |