We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
CX2E0RA/10-032V
Category
Area Sensors
Description
Area, H=32cm-1cm pitch,E+R,I+V
Stock availability:
On request
If you are looking for MD Micro Detectors CX2E0RA/10-032V, get in touch with FAMAGA, the world's prime retailer of mechanized equipment. Our company has worked for more than ten years - these are cycles of experience, which are outlined in the quality of outputs and individual attention to each buyer. We respect everyone, who liased with us - therefore, our regular clients obtain the most desirable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 3500 such buyers, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Bahamas, United Arab Emirates, Zambia, Eritrea, Benin, Austria, United States, Malawi, Singapore, Guyana, Malaysia, Burundi, South Sudan, Fiji, Estonia, Romania, Switzerland, Liberia, Israel, Indonesia, Kazakhstan, Jamaica, Gambia, Lithuania, Costa Rica, Uruguay, Philippines, Turkey, Brunei, Tajikistan, Togo, Burkina Faso, Australia, Mauritius, Nepal, Comoros, Botswana, Latvia, Serbia, China, Samoa, Seychelles. A well-elaborated logistics connection and a partnership network let us to deliver our items anywhere in the globe as soon as possible without undermining product quality.
A specific source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this quantity is increasing every day. We are happy that consumers choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as stay in control.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Distanza di rilevazione nominale | 0,3… 6m |
Distanza tra i raggi | 10mm |
Altezza controllata | 320mm |
Minimo oggetto rilevabile | 10mm |
Numero di raggi | 33 |
Regolazione di sensibilita | Auto-apprendimento via filo |
Principio di funzionamento | emettitore/ricevitore |
Tipo di uscita | 2 uscite analogiche (0-10V e 4-20mA) |
Funzione di uscita | rampa positiva |
Frequenza di commutazione | [(0,2 x No.ottiche - 1) + 1] x 2ms |
Tensione di alimentazione | 16,8…30Vdc |
Assorbimento a vuoto | ?330ma |
Corrente di carico | < 100mA |
Corrente di perdita | ? 10µA |
Caduta di tensione in uscita | < 1,5V @ 100mA |
Massima ondulazione residua | < 1,2Vpp |
Indicatori LED | rosso e giallo (emettitore) - verde, rosso e giallo (ricevitore) |
Ritardo alla disponibilita | < 3s |
Protezione al corto circuito | Si |
Protezione da inversione di polarita | Si |
Emissione | Led Infrarosso |
Immunita alla luce ambiente | IEC EN 60947-5-2 |
Protezioni da sovratensioni impulsive | Si |
Dimensioni | 20mm x 329mm x 35mm |
Peso | 750g |
Materiale corpo | alluminio verniciato RAL5002 |
Connessioni | 1xM12, 4 poli, maschio (CX2E), 1xM12, 8 poli, maschio (CX2R) |
Materiale parte attiva | PMMA |
Temperatura operativa | - 10°C…+ 55° C (senza condensa) |
Temperatura di stoccaggio | - 25°C…+ 60° C (senza condensa) |
Certificazioni | CE cULus |
Compatibilita elettromagnetica | IEC 60947-5-2 |
Urti e vibrazioni | IEC EN 60947-5-2 |
Grado di Protezione | IP67 |
Accessori inclusi | kit di fissaggio ST151 |