We are not the manufacturer, authorised distributor or authorised representative of the MD Micro Detectors brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
MD Micro Detectors
Country
Italy
Part number
UT1B/EM-0EUL
Category
Ultrasonic Sensors
Description
cylindrical ultrasonic
Stock availability:
On request
If you are questing MD Micro Detectors UT1B/EM-0EUL, get in touch with FAMAGA, the world's chief vendor of mechanized equipment. Our company has existed for more than ten years - these are cycles of experience, which are symbolized in the quality of products and special attention to each customer. We esteem everyone, who conspired with us - hence, our regular purchasers accept the most flexible purchase conditions and discounts on the industrial equipment market. Today, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 750 contracts are concluded per day, because FAMAGA operates all over the planet Germany, United Kingdom, Romania, Barbados, Madagascar, Zambia, Iraq, Georgia, Iceland, Finland, Vietnam, Belarus, Guyana, Nigeria, Djibouti, Slovenia, Tajikistan, Qatar, Fiji, Tanzania, Egypt, Mexico, Cape Verde, Burkina Faso, Gambia, Mozambique, Japan, Central African Republic, Seychelles, Kiribati, Suriname, Jamaica, Malaysia, Bolivia, United Arab Emirates, Latvia, Comoros, Brunei, Yemen, Russia, Samoa, Botswana, Sudan, China, Mali, Estonia, Iran. A well-developed logistics connection and a partnership network allow us to send our elements anywhere in the planet promptly without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been delivered, and this bulk is increasing every day. We are proud that users choose FAMAGA again and again, and we are eager to make more developed and technologically modern industrial equipment so as keep on top of it.
To request or book, contact us or write to the online chat on our official website. You can also send a list of the necessary equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Distanza di rilevazione nominale | 3500mm |
Deriva termica | ± 8% |
Ripetibilita | 1% |
Angolo apertura fascio | ± 7° |
Risoluzione | 4mm |
Regolazione di sensibilita | pulsante auto-apprendimento |
Isteresi | 1% |
Compensazione termica | Si |
Minima distanza di rilevamento (zona morta) | 250mm |
Errore di linearita | 1% |
Tipo di uscita | 2 x NPN |
Funzione di uscita | finestra standard - isteresi regolabile |
Frequenza di commutazione | 2Hz |
Tempo di risposta | 250ms |
Tensione di alimentazione | 12 - 30Vdc |
Assorbimento a vuoto | ?50mA |
Corrente di carico | 100mA |
Corrente di perdita | 10?A @ 30Vcc |
Caduta di tensione in uscita | 2,2Vmax. @ IL=100 mA |
Massima ondulazione residua | 5% |
Indicatori LED | LED verde: eco presente - LED giallo: uscita attiva |
Ritardo alla disponibilita | ? 500ms(digitale) |
Protezione al corto circuito | Si |
Protezione da inversione di polarita | Si |
Protezioni da sovratensioni impulsive | Si |
Dimensioni | M30 x 1,5 / L = 98mm |
Peso | 140g |
Materiale corpo | PBT |
Connessioni | connettore M12 |
Materiale parte attiva | resina epossidica caricata in vetro |
Coppia di serraggio | 1,5nM |
Temperatura operativa | - 20°C…+ 70°C |
Temperatura di stoccaggio | - 35°C…+ 70° C (senza condensa) |
Frequenza del trasduttore | 112KHz |
Certificazioni | CE cULus |
Compatibilita elettromagnetica | IEC 60947-5-2 |
Urti e vibrazioni | IEC EN 60947-5-2 / 7.4 |
Grado di Protezione | IP67 |
Accessori inclusi | 2 x M30x1,5 dadi, 2 rosette O 30 |