We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Keyence
Country
Japan
Name
FD-XS1
Type
Process Sensor
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are pursuing Keyence FD-XS1 , contact FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of products and special attention to each consumer. We appreciate everyone, who worked with us - therefore, our regular buyers obtain the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such buyers, and we constantly sign new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Russia, Cape Verde, Guinea-Bissau, Zambia, Vietnam, Sierra Leone, Bhutan, Latvia, Estonia, Swaziland, China, Luxembourg, Czech Republic, Fiji, Yemen, Pakistan, Finland, Norway, Australia, Albania, United States, Nicaragua, The Gambia, Egypt, Qatar, Costa Rica, Brunei, Chile, Djibouti, Uruguay, United Arab Emirates, Kenya, Dominica, Tunisia, Afghanistan, Mexico, East Timor, Mongolia. A well-elaborated logistics bond and a partnership network allow us to send our goods anywhere in the world as soon as possible without discrediting product quality.
A special source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the field of industrial equipment.
All goods from FAMAGA are assured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is rising every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To ask a question or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Model | FD-XS1 | |||
| Supported pipe materials | Metal pipes, Plastic pipes (soft/hard) *1 | |||
| Supported fluids | Liquids (water, oil, adhesive, grease, chemical solution, etc.) *1 | |||
| Supported fluid temperature | 0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature) | |||
| Clamp set model | Plastic pipe/tube attachment | FD-XC1R1, FD-XC1R2 | ||
| Metal pipe attachment | FD-XC1M | |||
| Maximum rated flow rate | 0 to 1000 mL/min | |||
| Zero cut flow rate | 20 mL/min*2 (variable, default) | |||
| Display resolution | Instantaneous flow rate | 0.1/1/10 mL/min (Displayed on controller) | ||
| Shot amount | 0.001/0.01/0.1/1 mL (Displayed on controller) | |||
| Repeatability | Plastic pipe /tube attachment | Response time: 50 ms | F.S. | ±0.6 %*3*4 |
| Instantaneous flow rate | ±6 mL/min*3*4 | |||
| Response time: 500 ms | ±1.9 mL/min*3 | |||
| Metal pipe attachment | Response time: 50 ms | F.S. | ±1 %*3*4 | |
| Instantaneous flow rate | ±10 mL/min*3*4 | |||
| Response time: 500 ms | ±3.2 mL/min*3 | |||
| Hysteresis | Variable | |||
| Integrated unit display | 0.1/1/10/100/1000/10000 mL (displayed on controller) | |||
| Display method | Status indicator | |||
| Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) , IP68G (JIS C0920) *5 | ||
| Operating ambient temperature | 0 to 60 °C (No freezing) | |||
| Operating ambient humidity | 35 % to 85 %RH (No condensation) | |||
| Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction | |||
| Shock resistance | 50 G 11 ms, 3 times each for X,Y,Z direction | |||
| Material | Sensor head | Head body: PPS/PPSU, in-cable amplifier: PPS, cable: PVC, controller connector: PPS/PBT/POM | ||
| Clamp set | For plastic pipe | Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7 | ||
| For metal pipe | Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7 | |||
| Weight | Approx. 230 g | |||
| *1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. *2 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. *3 This specification is valid when the flow velocity distribution is stable. This value does not take into account the effects of pulsation or fluctuations in flow velocity distribution due to facility factors. Convert the F.S. (full scale value) listed in the table according to the rated flow range. *4 The longer the response time is set, the more repeatability is improved. As a guideline, use v (50 ms/response time) times. *5 The connector part of the sensor head cable is IP65/IP67. |
