We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Keyence FD-XS20E , connect FAMAGA, the world's major retailer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are depicted in the quality of merchandises and private attention to each customer. We understand everyone, who liased with us - therefore, our regular consumers bring in the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 proceedings are resolved per day, because FAMAGA operates all over the world Germany, United Kingdom, El Salvador, Estonia, Sri Lanka, Lithuania, Switzerland, Bosnia and Herzegovina, Grenada, Madagascar, Luxembourg, Kuwait, Cape Verde, Serbia, Libya, South Sudan, Swaziland, Botswana, Samoa, Kenya, New Zealand, Finland, Ireland, Fiji, Georgia, Mauritania, Cyprus, Haiti, Yemen, Hungary, China, Central African Republic, Vietnam, Ukraine, Syria, Cameroon, Latvia, Afghanistan, Mauritius, Laos. A well-built logistics link and a partnership network let us to dispatch our units anywhere in the world promptly without disreputing product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only experts, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FD-XS20E | |
Supported pipe materials | Metal pipes, Plastic pipes (soft/hard) *1 | |
Supported fluids | Liquids (water, oil, adhesive, grease, chemical solution, etc.) *1 | |
Supported fluid temperature | 0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature) | |
Clamp set model | Plastic pipe/tube attachment | FD-XC20R1, FD-XC20R2, FD-XC20R3, FD-XC20R4 |
Metal pipe attachment | FD-XC20M1, FD-XC20M2 | |
Maximum rated flow rate | Outer diameter of pipe 3/8 ” (9.53 mm) , o 10, o 10.5: 15.00 L/min Outer diameter of pipe o 12, 1/2 ” (12.7 mm) , o 13.8: 20.00 L/min | |
Zero cut flow rate | 0.15 L/min*2 (variable, default) | |
Display resolution | Instantaneous flow rate | 0.01/0.1 L/min (Displayed on controller) |
Repeatability | Response time 50 ms: ±20 % of RD Response time 500 ms: ±15 % of RD | |
Hysteresis | Variable | |
Display method | Status indicator | |
Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) , IP68G (JIS C0920) *3 |
Operating ambient temperature | -10 to 60 °C (No freezing) | |
Operating ambient humidity | 35 % to 85 %RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction | |
Shock resistance | 50 G 11 ms, 3 times each for X,Y,Z direction | |
Material | Sensor head | Head body: PPS/PPSU, relay amplifier: PPS, cable:PVC, controller connector: PPS/PBT/POM |
Clamp set | For plastic pipe | Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7 |
For metal pipe | Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7 | |
Weight | Approx. 260 g | |
*1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. *2 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. *3 The connector part of the sensor head cable is IP65/IP67. |