We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Keyence FD-XS1E , contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and particular attention to each buyer. We appreciate everyone, who collaborated with us - therefore, our regular purchasers get the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Angola, Luxembourg, Italy, Greece, Bolivia, Sri Lanka, Malawi, Indonesia, Serbia, Nepal, Estonia, Peru, Paraguay, Russia, Kuwait, Benin, Pakistan, Ukraine, Uruguay, Samoa, Guatemala, South Sudan, Jamaica, Belarus, Panama, Zimbabwe, Swaziland, Israel, Cape Verde, Uganda, Switzerland, Macedonia, East Timor, Malta, Madagascar, Latvia, Costa Rica, Zambia. A well-shaped logistics chains and a partnership network guide us to ship our items anywhere in the world on-time without damaging product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that consumers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FD-XS1E | |
Supported pipe materials | Metal pipes, Plastic pipes (soft/hard) *1 | |
Supported fluids | Liquids (water, oil, adhesive, grease, chemical solution, etc.) *1 | |
Supported fluid temperature | 0 °C (no freezing on the pipe surface) to 100 °C (Pipe surface temperature) | |
Clamp set model | Plastic pipe/tube attachment | FD-XC1R1, FD-XC1R2 |
Metal pipe attachment | FD-XC1M | |
Maximum rated flow rate | 1000 mL/min | |
Zero cut flow rate | 50 mL/min*2 (variable, default) | |
Display resolution | Instantaneous flow rate | 1/10 mL/min (Displayed on controller) |
Repeatability | Response time 50 ms: ±20 % of RD Response time 500 ms: ±15 % of RD | |
Hysteresis | Variable | |
Display method | Status indicator | |
Environmental resistance | Enclosure rating | IP65/IP67 (IEC60529) , IP68G (JIS C0920) *3 |
Operating ambient temperature | 0 to 60 °C (No freezing) | |
Operating ambient humidity | 35 % to 85 %RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, double amplitude 1.5 mm, 2 hours each for X,Y,Z direction | |
Shock resistance | 50 G 11 ms, 3 times each for X,Y,Z direction | |
Material | Sensor head | Head body: PPS/PPSU, relay amplifier: PPS, cable:PVC, controller connector: PPS/PBT/POM |
Clamp set | For plastic pipe | Body, fixing screw: PPS, detection surface: special rubber, pipe support rubber: FKM, sensor head fixing screw: SUSXM7 |
For metal pipe | Metal: SUS304/SUSXM7, detection surface: special rubber, clamp support rubber: FKM, sensor head fixing screw: SUSXM7 | |
Weight | Approx. 230 g | |
*1 Liquid must allow for the passage of an ultrasonic pulse, as well as not contain large air pockets or excessive bubbles. Readings may become unstable depending on the type of pipe. *2 The zero cut flow rate can be changed in the settings. When using the unit with a low flow rate range, perform an origin adjustment when the fluid is not moving if you change the zero cut flow rate. *3 The connector part of the sensor head cable is IP65/IP67. |