We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are seeking Keyence LK-G3000P , connect FAMAGA, the world's major retailer of industrialized equipment. Our company has advanced for more than ten years - these are years of experience, which are depicted in the quality of merchandises and private attention to each customer. We understand everyone, who liased with us - therefore, our regular consumers bring in the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Australia, Burma, Italy, Chad, Bahamas, Brazil, Suriname, Madagascar, The Bahamas, Qatar, Fiji, Russia, Malta, Philippines, Lithuania, Burkina Faso, Djibouti, Samoa, Serbia, Malaysia, Sweden, Tanzania, Albania, Norway, Yemen, Uruguay, Mauritania, Angola, Uzbekistan, Comoros, Antigua and Barbuda, Mauritius, Bulgaria, United States, Georgia, Pakistan, Moldova, Cyprus, Mongolia, Tajikistan, China, Ghana. A well-built logistics link and a partnership network allow us to dispatch our goods anywhere in the world as soon as possible without disreputing product quality.
A special source of dignity for FAMAGA is its team members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the field of industrial equipment.
All merchandises from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To get some advice or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | LK-G3000P*1 | |
Type | Separate monitor model*2 | |
Head compatibility | All LK-G sensor heads are compatible | |
Connectable number of heads | Maximum of 2 units | |
Display | Minimum display unit | 0.01 µm |
Display range | ±9,999.99 mm to ±9,999.99 µm (Selectable from six levels) | |
Display cycle | 10 times/sec | |
Terminal block | Analogue voltage output | ±10 V x 2 outputs, output impedance: 100 ? |
Analogue current output | 4 to 20 mA x 2 outputs, maximum load resistance: 350 ? | |
Timing input | For OUT1, voltage input | |
Reset input | ||
Auto-zero input | ||
Laser remote interlock input | Non-voltage input | |
Comparator output | For OUT1, PNP open-collector output | |
Alarm output | For OUT1, PNP open-collector output (N.C.) | |
Expansion connector | Timing input | For OUT2, voltage input |
Reset input | ||
Auto-zero input | ||
Program switching input | Voltage input x 3 inputs | |
Laser-Off input | For Head A/Head B, voltage input | |
Comparator output | For OUT2, PNP open-collector output | |
Alarm output | For OUT2, PNP open-collector output (N.C.) | |
Binary | Binary output | Measured data output (21 bits), OUT1/OUT2 selectable, PNP open-collector output |
Strobe output | PNP open-collector output | |
Binary selector output | ||
Binary selector input | Voltage input | |
RS-232C interface | Measured data output and control input/output (Maximum baud rate: 115,200 bps, selectable) | |
USB interface | In conformity with USB Revision 2.0 Full speed (USB1.1 compatible) | |
Major functions | 2 OUT simultaneous measurement, Operation, Averaging, Filter, Calibration, Measurement, AUTO ZERO, Sampling frequency setting, Mutual interference prevention, Data storage, 8-program memory, ECO mode, ABLE setting, Target setting, ABLE tuning, Selection of measurement surface of transparent target, Statistics processing, Connection of setting support software, Selectable head-mounting, etc. | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current consumption | 500 mA or less with 1 head/600 mA or less with 2 heads | |
Environmental resistance | Ambient temperature | 0 to +50 °C |
Relative humidity | 35 to 85 % RH (No condensation) | |
Weight | Approx. 370 g (including the cable) | |
*1 The rating of the PNP open collector: 50 mA max. (30 V max.), residual voltage of 1 V max. The rating of voltage input: 10.2 V or more ON voltage (26.4 V max.) 0.6 mA or less OFF current. *2 LK-G3000P can be operated singly. The measured value display and setting modifications can be performed on the display panel (LK-GD500) or via the setting support software (LK-H1W). |