We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Keyence LK-2111 , get in touch with FAMAGA, the world's key producer of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are illustrated in the quality of spare parts and individual attention to each consumer. We respect everyone, who worked with us - thus, our regular clients obtain the most flexible purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such clients, and we constantly compose new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, South Africa, El Salvador, Bhutan, Liberia, Croatia, Indonesia, Myanmar, Algeria, Andorra, Laos, Tanzania, Kenya, Luxembourg, Nigeria, Seychelles, Ecuador, Iran, Brazil, Libya, Israel, Mongolia, Turkmenistan, Pakistan, Kyrgyzstan, Botswana, Bosnia and Herzegovina, Azerbaijan, Turkey, Macedonia, Cyprus, Uganda, China, North Korea, Zimbabwe, Ghana, India, Paraguay, Madagascar, Zambia, South Korea, Ukraine, Togo, Niger, Costa Rica. A advanced logistics bond and a partnership network allow us to conduct our goods anywhere in the globe as soon as possible without undermining product quality.
A special source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only professionals, who already have experience in the range of factory-made equipment.
All goods from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is increasing every day. We are pleased that customers choose FAMAGA again and again, and we are pleased to make more exceptional and technologically modern industrial equipment so as stay in control.
To inquire or book, contact us or write to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Model | LK-2111 | |
Type | Amplifier unit, Standard Controller | |
Measurement mode | ? | |
Reference distance | 80 mm | |
Measuring range | ±15 mm | |
Light source | Type | Visible red semiconductor laser |
Wavelength | 670 nm | |
Output | 0.95 mW | |
Laser Class | FDA (CDRH) 21CFR Part 1040.10 | Class 2 Laser Product |
Laser Class | IEC 60825-1 | |
Spot diameter (at standard distance) | Approx. 70 µm, Approx. 70 x 1,100 µm | |
Linearity | ±0.1% of F.S. *1 | |
Repeatability | 3 µm*2 | |
Analogue output | Output voltage | ±5 V (3 µm/mV)*3 |
Impedance | 100 ? | |
Output current | 4 to 20 mA (Applicable load: 350 ? max.) | |
Alarm output | NPN: 100 mA max. (40 V max.) (N.C.), Residual voltage: 1 V max. | |
Sampling cycle | 1,024 µs | |
Other functions | Auto-zero, analog output holding when an alarm occurs, gain switching, response switching, span and shift adjustment of mirror surface measurement mode, changing the sampling cycle | |
Temperature characteristics | 0.01% of F.S./°C | |
Rating | Power voltage | 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Maximum current consumption | 400 mA max. | |
Environmental resistance | Enclosure rating | IP67 |
Ambient light | Incandescent or fl uorescent lamp: 10,000 lux max. | |
Ambient temperature | 0 to +50 °C (No condensation) | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Material | Polycarbonate | |
Weight | Approx. 515 g (including cable) | |
*1 Linearity was obtained using KEYENCE's standard target (Zirconia block gauge: LK-031/036, LK-081/086, LK-011, White ceramic block gauge: LK-501/503). *2 Repeatability was obtained using KEYENCE's analogue sensor controller (RD-50) with the number of averaging measurements set to 64. Note: The ripple of the analogue output may be 1 mV or more due to co mmon mode noise when observed with an oscilloscope or a high-speed A/D conversion board. *3 When measurement is impossible, 12 V (31.2 mA) is output. |