We are not the manufacturer, authorised distributor or authorised representative of the Keyence brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are inspecting Keyence FS-N12N , connect FAMAGA, the world's influential vendor of machine made equipment. Our company has functioned for more than ten years - these are years of experience, which are depicted in the quality of merchandises and particular attention to each purchaser. We understand everyone, who joined with us - therefore, our regular purchasers procure the most convenient purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Moldova, Suriname, Kuwait, Iceland, Grenada, Bahamas, Chile, Costa Rica, China, Egypt, Vietnam, Samoa, Japan, Australia, South Sudan, Tunisia, Qatar, Albania, Namibia, Pakistan, Macedonia, Monaco, Botswana, Afghanistan, Burkina Faso, Georgia, Norway, Haiti, Angola, Mexico, East Timor, Philippines, Zimbabwe, Mauritania, United Arab Emirates, Mozambique, United States, Bulgaria, Benin, Slovakia, Sweden, Finland. A well-shaped logistics connection and a partnership network allow us to ship our goods anywhere in the world as soon as possible without damaging product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Model | FS-N12N | |
Type | Standard 1 output Cable | |
Output | NPN | |
Main unit/Expansion unit | Expansion unit | |
Control output | 1 NPN open collector 24 V, 1 output max: 100 mA or less, 2 output total: 100 mA or less (used stand-alone)/20 mA or less (multiple connections), residual voltage 1 V or less | |
Monitor output (1-5 V) | - | |
External input | ||
Response time | 50 µs (HIGH SPEED) /250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER) /4 ms (ULTRA) /16 ms (MEGA) | |
Multiple connections to Expansion units | Up to 16 units can be connected total (two output type is treated as two units) | |
Light source | Red, 4-element LED | |
APC | ON/OFF switchable (Factory setting: OFF) | |
Number of interference prevention units | 0 for HIGH SPEED, 4 for FINE, 8 for TURBO/SUPER/ULTRA/MEGA (When set to double, the number of interference-prevention units will be doubled.) | |
Rating | Power voltage | 12 to 24 VDC ±10 %, Ripple (P-P) 10 % or less |
Current Consumption | Normal: 900 mW or less (36 mA max. at 24 V, 48 mA max. at 12 V)*1 Eco on mode: 800 mW or less (32 mA max. at 24 V, 39 mA max. at 12 V)*1 Eco Full mode: 470 mW or less (19 mA max. at 24 V, 23 mA max. at 12 V) | |
Environmental resistance | Ambient light | Incandescent lamp: 20,000 lux or less, Sunlight: 30,000 lux or less |
Ambient temperature | -20 to +55 °C (No freezing)*2 | |
Relative humidity | 35 to 85 % RH (No condensation) | |
Vibration resistance | 10 to 55 Hz, Double amplitude 1.5 mm, 2 hours in each of the X, Y, and Z directions | |
Shock resistance | 500 m/s2, 3 times in each of the X, Y, and Z directions | |
Case material | Both main unit and expansion unit housing material: Polycarbonate | |
Weight | Approx. 45 g | |
*1 Increases 100 mW (4.0 mA) for High Speed mode *2 One or two more units connected: -20 to +55 °C, 3 to 10 more units connected: -20 to +50 °C, 11 to 16 more units connected: -20 to +45 °C. When using 2-outputs, one unit is counted as two units. All temperature regulations are for when the unit is mounted on a DIN rail and installed on metal sheeting. |