Specifications 131T
Solenoid Valves for General Applications
The manufacturing with all the fittings on the body allows replacing the coil without removing the piping. Control Valves for Air, Water, Hydraulic Oil, Combustible Oil, non-corrosive neutral Fluids.
General Information:
Direct control solenoid valve
Closing by Latch Disc
Function 3-Way NC / UN
Protection IP 65 with connector
Standard Voltage 24 VDC, 24V,110V,230V AC
Options:
Special Voltage
Insulation Class Coils H (180 °C)
Waterproof Coils IP 67, Atex II 1 GD / II 2 GD
Manual control by push-button, either temporary or permanent insertion
Version for Oxygen (design type 133TS0852)
Features 131T
Valve Body: Die-Cast brass
Latch Disc: FKM
Pass-through Diameter: From 2 to 4.,5 mm
Rate Value Kvs: From 2.5 to 7 l/min. (depending on the diameter)
Service Pressure: 0 - 10 (depending on the type)
Max. Pressure of Use: 25 bar (10 bar max. for manual control types)
Coil Insulation Class: class F (155 °C)
Insert: 100 % continuous insert
Threaded Fittings: Bevel Threaded G 1/4"
Viscosity of the Fluid: 76 Cst. max.
Temperatures of the Fluid: From -10 °C to + 120 °C depending on the type of vds PDF)
Ambient Temperature: From - 10 °C to + 50 °C
