We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
MGB-L1HE-ARA-R-121087
Part number
121087
Description
Tür-Sicherheitsschließfach-Montagegriff rechts MGB-L1HE-ARA-R-121087
Stock availability:
On request
If you are seeking Euchner MGB-L1HE-ARA-R-121087 121087, communicate with FAMAGA, the world's key producer of machine made equipment. Our company has lasted for more than ten years - these are cycles of experience, which are expressed in the quality of items and individual attention to each consumer. We cherish everyone, who worked with us - so, our regular clients obtain the most helpful purchase conditions and discounts on the factory-made equipment market. At this moment, there are more than 4 thousand such clients, and we constantly form new agreements. More than 600 transactions are made per day, because FAMAGA works all over the earth Germany, United Kingdom, East Timor, Colombia, Bahrain, Lithuania, Austria, Botswana, Philippines, Kuwait, Congo, Guyana, Papua New Guinea, Bulgaria, Japan, Malaysia, Armenia, The Bahamas, Cyprus, Oman, Antigua and Barbuda, Dominica, Monaco, Comoros, Yemen, Mexico, Namibia, Afghanistan, Kenya, United Arab Emirates, Mauritania, Panama, Denmark, Ireland, Tunisia, Nicaragua, Egypt, Qatar, South Sudan, Burundi, Bolivia, Poland, Croatia, Madagascar, Pakistan, Norway, The Gambia, Uruguay. A well-developed logistics bond and a partnership network allow us to ship our goods anywhere in the world immediately without undermining product quality.
A particular source of good name for FAMAGA is its employees, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are ensured - we are responsible for the result of our work. At this moment, more than 10 million units of products have been shipped, and this amount is increasing every day. We are happy that clients choose FAMAGA again and again, and we strive to make more developed and technologically modern industrial equipment so as to stay on the top.
To inquire or place an order, phone us or write to the online chat on our site. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
MGB-L1... | The locking arm is held in the locked position by spring force and is unlocked by solenoid force (closed-circuit current principle, mechanically locked). |
OD | ON when the door is closed |
OT | Bolt tongue inserted into the evaluation module |
OL | Guard locking solenoid in locked position |
OI | Diagnostics, there is a fault |
S2 | One NO contact, illuminated |
S3 | One NO contact, illuminated |
Housing material | Die-cast zinc/stainless steel powder-coated |
Weight | |
Net | 0,75 kg |
Ambient temperature | -20 ... 55 °C |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Product version number | V2.0.0 |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 0,75 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP65 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Switching frequency | 0,25 Hz |
Connection | Cable entries M20x1.5 |
Guard locking principle | Closed-circuit current principle |
Locking force FZh | 2000 N |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Rated insulation voltage Ui | 30 V |
Rated impulse withstand voltage Uimp | 1,5 kV |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connection cross-section | |
(Rigid/flexible) | 0,13 ... 1,5 mm? (AWG 24 ... AWG 16) |
(Rigid/flexible) with cable end sleeve according to DIN 46 228/1 | 0,25 ... 1,5 mm? |
(Rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1 | 0,25 ... 0,75 mm? |
Safety class | III |
Discrepancy time | |
Between FO1A and FO1B | max.10 ms |
Risk time according to EN 60947-5-3 | max.350 ms |
Transponder coding | Unicode |
Power supply UB | |
Operating voltage DC | |
UB | 24 V DC -15% ... 10% |
Current consumption | |
IUB | max.80 mA |
Power supply UA | |
Operating voltage DC | |
UA | 24 V DC -15% ... 10% |
Current consumption | |
IUA | max.375 mA |
Safety outputs FO1A, FO1B | |
Test pulses | max.1 ms |
Test-pulse interval | min.100 ms |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
UFO1A /UFO1B LOW | 0 ... 1 V DC |
UFO1A /UFO1B HIGH | UB-2V ... UB V DC |
Output current | |
Per safety output FO1A / FO1B | 1 ... 200 mA |
Monitoring outputs OD, OT, OL, OI | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | UA-2V ... UA V DC |
Output current | max.50 mA |
Controls and indicators | |
Switching voltage | UA V |
Switching current | 1 ... 10 mA |
Breaking capacity | max.0,25 W |
Power supply LED | 24 V DC |
Solenoid control input IMP1, IMP2, IMM | |
Test pulses | max.5 ms |
Test-pulse interval | min.100 ms |
Additional feature | Incl. cover set ID. No. 120344 |
Product version number | V3.0.3 |
Slide-in label | 2 pcs. without marking |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.7 x 10-9 |
Control of the guard locking | |
Category | 4 |
Performance Level | PL e |
PFHD | 2.8 x 10-9 |
Mission time | 20 y |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 1,00 kg |
Ambient temperature | -20 ... 55 °C |
Degree of protection | IP65 |
Installation orientation | Door hinge DIN right |
Product version number | V3.0.0 |