We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CTP-LBI-AP-U-HA-AZ-SA-127798
Part number
127798
Stock availability:
On request
If you are pursuing Euchner CTP-LBI-AP-U-HA-AZ-SA-127798 127798, make contact with FAMAGA, the world's principle distributor of streamlined equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of products and particular attention to each user. We appreciate everyone, who liased with us - thus, our regular customers accept the most beneficial purchase conditions and discounts on the manufacturing equipment market. At this moment, there are more than 4500 such purchasers, and we constantly arrange new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the earth Germany, United Kingdom, Costa Rica, Bosnia and Herzegovina, Iraq, Brunei, North Korea, Samoa, Syria, Portugal, Uruguay, Guatemala, Mali, Georgia, Peru, Chad, Colombia, Pakistan, Liberia, Turkey, Namibia, Nigeria, Norway, Belize, Djibouti, Afghanistan, Zambia, Madagascar, Brazil, Liechtenstein, Hungary, Ukraine, Russia, Thailand, Benin, Ecuador, Estonia, Iceland, Tajikistan, Eswatini, Australia, New Zealand, Cyprus, Czech Republic, Kenya. A well-shaped logistics series and a partnership network allow us to dispatch our goods anywhere in the earth immediately without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to common cause. We call into our team only experts, who already have experience in the field of machine made streamlined equipment.
All merchandises from FAMAGA are guaranteed - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this quantity is increasing every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more advanced and technologically advanced industrial equipment so as stay in control.
To consult or order, phone us or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
CTP?LBI | Guard locking operated by means of input signal. |
Plug connector (view of connection side) | Pin | Designation | Function | Conductor coloring of connecting cable |
---|---|---|---|---|
1 | IMP | Operating voltage of guard locking solenoid 24 V DC | WH | |
2 | UB | Operating voltage of AP electronics 24 V DC | BN | |
3 | FO1A | Safety output, channel 1 | GN | |
4 | FO1B | Safety output, channel 2 | YE | |
5 | OI | Diagnostic output | GY | |
6 | OD | Door monitoring output | PK | |
7 | OL | Guard locking monitoring output | BU | |
8 | 0 V UB | Control input of guard locking solenoid, 0 V | RD |
Housing material | |
Switch head cover | Die-cast zinc |
Safety switch housing | Fiber glass reinforced thermoplastic |
Weight | |
Net | 0,42 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... +55 °C |
Degree of protection | IP67 / IP69 / IP69K |
Resilience to vibration | In acc. with EN IEC 60947-5-3 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Ready delay | max.1 s |
Switching frequency | max.0,5 Hz |
Connection | 1 plug connector M12, 8-pin |
Approach speed | 20 m/min |
Guard locking principle | BiState |
Locking force Fmax | 3900 N |
Locking force FZh | 3000 N |
Retention force | 5 N |
Extraction force | 10 N |
Actuating force | 8 N |
Overtravel | 5 mm |
Operating voltage DC | |
UUB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Current consumption | |
IUB (IMP=HIGH) | 440 mA |
IUB (IMP=LOW) | 40 mA |
IIMP (IMP=HIGH) | 20 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 150mA |
Fusing | |
External (operating voltage UB) | 0,5 ... 8 A |
Rated insulation voltage Ui | max.50 V |
Rated impulse withstand voltage Uimp | max.0,5 kV |
Power consumption | 1,7 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Control voltage | |
UIMP (HIGH) | 15 ... 24 V |
UIMP (LOW) | 0 ... 5 V |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs FO1A / FO1B | |
Test pulses | max.0,3 ms |
Test-pulse interval | min.100 ms |
Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
Switching current | |
Per safety output FO1A / FO1B | 1 ... 150 mA |
Output voltage | |
Low U(FO1A) / U(FO1B) | 0 ... 1 V DC |
High U(FO1A) / U(FO1B) | UB-1,5 ... UB V DC |
Off-state current Ir | max.0,25 mA |
Switch-on time | max.400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms In acc. with EN IEC 60947-5-3 |
Monitoring output OL | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Monitoring output OD | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Monitoring output OI | |
Type of output | p-switching, short circuit-proof |
Switching current | 1 ... 50 mA |
Output voltage | 0,8xUB ... UB V DC |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Guard lock monitoring | |
Mission time | 20 y |
Category | 4 |
Performance Level | PL e |
PFHD | 4.1 x 10 -9 |
Guard locking control | |
Mission time | 20 y |
Category | B |
Performance Level | PL b |
PFHD | 2.1 x 10 -9 |