We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET2-AR-CDA-AH-50X-SH-112446
Part number
112446
Stock availability:
On request
If you are questing Euchner CET2-AR-CDA-AH-50X-SH-112446 112446, make contact with FAMAGA, the world's major retailer of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of merchandises and particular attention to each purchaser. We value everyone, who worked with us - thus, our regular purchasers bring in the most flexible purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 600 purchases are terminated per day, because FAMAGA delivers all over the world Germany, United Kingdom, The Bahamas, Ukraine, Estonia, Bahrain, Serbia, Andorra, East Timor, Malawi, Dominican Republic, Mongolia, Georgia, Russia, Costa Rica, Ecuador, Swaziland, Mexico, Morocco, El Salvador, Bosnia and Herzegovina, Comoros, North Korea, China, Indonesia, Madagascar, United Arab Emirates, Vietnam, Kazakhstan, Seychelles, South Sudan, Poland, Cape Verde, Tunisia, Hungary, Croatia, Namibia, Cyprus, Peru, Jordan, Jamaica, Zambia, Dominica, Ireland. A well-shaped logistics connection and a partnership network assist us to deliver our units anywhere in the world as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its employees, each of whom contributes to our work. We call into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that customers choose FAMAGA again and again, and we are eager to make more developed and technologically innovative industrial equipment so as stay in control.
To request or place an order, contact us or write to the online chat on our site. You can also dispatch a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
CET2 | Open-circuit current principle guard locking by solenoid force. Activation of the guard locking by applying voltage to the guard locking solenoid. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | freely configurable |
LED 2 gn | freely configurable |
OUT | Monitoring output (semiconductor) |
RST | Reset input |
J | Teach-in input |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP65/IP67 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
X | ±5 mm |
Y | ±5 mm |
Z | ±4 mm |
Ready delay | 10 s |
Switching frequency | max.0,5 Hz |
Connection | 1 plug connector M23, 19-pin, RC18 |
Approach speed | 20 m/min |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED1 , LED2 | 24 V DC -15% ... 10% |
Current consumption | |
ICM | 480 mA |
IB | 80 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.14 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Safety outputs OA/OB | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
High U(OA,OB) | UB-1,5V ... UB V DC |
Low U(OA,OB) | 0 ... 1 V DC |
Output current | |
per safety output | 1 ... 200 mA |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Delay per device | 5 ms |
Switch-on time | |
Safety outputs | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Teach-in input J | |
Input voltage | |
Low | 0 ... 1 V DC Teach-in input J |
High | 15 ... 27,6 V DC Teach-in input J |
Monitoring output OUT | |
Type of output | Semiconductor output, p-switching, short circuit-proof |
Output voltage | |
OUT | 0,8xUB ... UB V DC |
Output current | |
OUT | 1 ... 50 mA |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head downward or horizontal | 4 |
Head upward | 3 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Mission time | 20 y |