We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
MGB-L2-APA-AA6A1-S3-L-110545
Part number
110545
Stock availability:
On request
If you are inspecting Euchner MGB-L2-APA-AA6A1-S3-L-110545 110545, call FAMAGA, the world's major company of factory-made equipment. Our company has lasted for more than ten years - these are years of experience, which are expressed in the quality of items and individual attention to each consumer. We value everyone, who liased with us - so, our regular clients obtain the most attractive purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 600 agreements are achieved per day, because FAMAGA works all over the planet Germany, United Kingdom, Bahrain, Dominican Republic, Slovenia, Equatorial Guinea, Czech Republic, Benin, Canada, Suriname, Singapore, Romania, Swaziland, Mali, Turkey, Cape Verde, Tanzania, Samoa, Antigua and Barbuda, Netherlands, Kuwait, Poland, Bangladesh, Malaysia, Guyana, Zambia, Zimbabwe, Tajikistan, Albania, United Arab Emirates, Iceland, Yemen, Angola, Uruguay, Mozambique, Estonia, Syria, Switzerland, Djibouti, Costa Rica, Cyprus, Australia, Sweden, Vietnam, Latvia, Nigeria. A well-built logistics network and a partnership network cheer us to conduct our elements anywhere in the world quickly without undermining product quality.
A particular source of repute for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the sphere of industrial equipment.
All outcomes from FAMAGA are ensured - we are responsible for the result of our work. Now, more than 10 million units of products have been shipped, and this amount is increasing every day. We are happy that users choose FAMAGA again and again, and we are happy to make more developed and technologically innovative industrial equipment so as to stay on the top.
To request or place an order, phone us or write a message to the online chat on our site. You can also direct a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
MGB-L2... | The locking arm is kept in locked position by solenoid force and unlocked by spring force when the solenoid is switched off (open-circuit current principle, electrically locked). |
OD | ON when the door is closed |
OT | Bolt tongue inserted in the evaluation module |
OL | Guard locking solenoid in locked position |
OI | Diagnostics, there is a fault |
S2 | 1 NO contact, white, illuminated |
S3 | 1 NO contact, yellow, illuminated |
S4 | 1 NO contact, blue, illuminated |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 0,75 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP65 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN left |
Switching frequency | 0,25 Hz |
Connection | |
Plug connector SFF5 | |
Cable entries M20x1.5 | |
Guard locking principle | Open-circuit current principle |
Locking force FZh | 2000 N |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Rated insulation voltage Ui | 30 V |
Rated impulse withstand voltage Uimp | 1,5 kV |
Degree of contamination (external, according to EN 60947-1) | 3 |
Connection cross-section | |
(Rigid/flexible) with cable end sleeve with collar according to DIN 46 228/1 | 0,25 ... 0,75 mm? |
(Rigid/flexible) with cable end sleeve according to DIN 46 228/1 | 0,25 ... 1,5 mm? |
(Rigid/flexible) | 0,13 ... 1,5 mm? (AWG 24 ... AWG 16) |
Safety class | III |
Discrepancy time | |
Between FO1A and FO1B | max.10 ms |
Risk time according to EN 60947-5-3 | max.350 ms |
Transponder coding | Unicode |
Monitoring outputs OD, OT, OL, OI | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | UA-2V ... UA V DC |
Output current | max.50 mA |
Controls and indicators | |
Switching voltage | UA V |
Switching current | 1 ... 10 mA |
Breaking capacity | max.0,25 W |
Power supply LED | 24 V DC |
Solenoid control input IMP1, IMP2, IMM | |
Test pulses | max.5 ms |
Test-pulse interval | min.100 ms |
Power supply UB | |
Operating voltage DC | |
UB | 24 V DC -15% ... 10% |
Current consumption | |
IUB | max.80 mA |
Power supply UA | |
Operating voltage DC | |
UA | 24 V DC -15% ... 10% |
Current consumption | |
IUA | max.375 mA |
Safety outputs FO1A, FO1B | |
Test pulses | max.0,3 ms |
Test-pulse interval | min.100 ms |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
UFO1A /UFO1B HIGH | UB-2V ... UB V DC |
UFO1A /UFO1B LOW | 0 ... 1 V DC |
Output current | |
Per safety output FO1A / FO1B | 1 ... 200 mA |
Belegungsschema | L1 |
Position 2 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | white |
Schaltelement | 1NO |
Position 3 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | Yellow |
Schaltelement | 1NO |
Position 4 | |
Ausfuhrung | Illuminated push buttons |
Einlegeschild | |
Extras | |
Farbe | Blue |
Schaltelement | 1NO |
Product version number | V3.0.3 |
Slide-in label | |
Automatik Start | |
Zutritt Anforderung | |
Storung Quittieren | |
Automatic Start | |
Access Request | |
3 pc. without marking | |
Failure Reset |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.7 x 10-9 |
Mission time | 20 y |