We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are questing Euchner MGB-L2H-APA-R-110460 110460, get in touch with FAMAGA, the world's key company of mechanized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are outlined in the quality of outcomes and personalseparate attention to each consumer. We esteem everyone, who engaged with us - thus, our regular purchasers pick up the most beneficial purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such customers, and we constantly arrange new agreements. More than 600 agreements are achieved per day, because FAMAGA delivers all over the world Germany, United Kingdom, Cuba, Honduras, Cambodia, Sri Lanka, Montenegro, Belarus, Japan, Costa Rica, The Bahamas, Guyana, Dominica, Canada, Slovakia, Central African Republic, Finland, India, Guatemala, Andorra, Fiji, Chad, Romania, Syria, Latvia, Bosnia and Herzegovina, Switzerland, Angola, Moldova, Liechtenstein, South Sudan, United States, China, Mali, Sweden, Malaysia, Algeria, Madagascar, Samoa, Tajikistan, Estonia, Peru, Jordan, Togo, Sudan, Haiti, Cape Verde, Kuwait, Greece. A well-developed logistics network and a partnership network guide us to ship our goods anywhere in the planet on-time without damaging product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We accept into our team only experts, who already have experience in the range of industrial equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been delivered, and this amount is growing every day. We are proud that clients choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To consult or book, call us by phone or write a message to the online chat on our site. You can also dispatch a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
MGB-L2... | The locking arm is kept in locked position by solenoid force and unlocked by spring force when the solenoid is switched off (open-circuit current principle, electrically locked). |
OT | Bolt tongue inserted in the evaluation module |
OI | Diagnostics, there is a fault |
S1 | 2 positively driven NC contacts, emergency stop with turn-to-reset, not illuminated |
S2 | 1 NO contact, illuminated |
S3 | 1 NO contact, illuminated |
S4 | 1 NO contact, not illuminated |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 0,75 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP65 |
Mechanical life | 1 x 106 |
In case of use as door stop, and 1 Joule impact energy | 0,1 x 106 |
Installation orientation | Door hinge DIN right |
Switching frequency | 0,25 Hz |
Connection | Plug connector RC18 |
Guard locking principle | Open-circuit current principle |
Locking force FZh | 2000 N |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Rated insulation voltage Ui | 30 V |
Rated impulse withstand voltage Uimp | 1,5 kV |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | III |
Discrepancy time | |
Between FO1A and FO1B | max.10 ms |
Risk time according to EN 60947-5-3 | max.350 ms |
Transponder coding | Unicode |
Solenoid control input IMP1, IMP2, IMM | |
Test pulses | max.5 ms |
Test-pulse interval | min.100 ms |
Power supply UB | |
Operating voltage DC | |
UB | 24 V DC -15% ... 10% |
Current consumption | |
IUB | max.80 mA |
Power supply UA | |
Operating voltage DC | |
UA | 24 V DC -15% ... 10% |
Current consumption | |
IUA | max.375 mA |
Safety outputs FO1A, FO1B | |
Test pulses | max.0,3 ms |
Test-pulse interval | min.100 ms |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
UFO1A /UFO1B HIGH | UB-2V ... UB V DC |
UFO1A /UFO1B LOW | 0 ... 1 V DC |
Output current | |
Per safety output FO1A / FO1B | 1 ... 200 mA |
Monitoring outputs OD, OT, OL, OI | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | UA-2V ... UA V DC |
Output current | max.50 mA |
Controls and indicators | |
Switching voltage | UA V |
Switching current | 1 ... 10 mA |
Breaking capacity | max.0,25 W |
Power supply LED | 24 V DC |
Emergency stop | |
Switching voltage | 5 ... 24 V |
Switching current | 1 ... 100 mA |
Breaking capacity | max.0,25 W |
Power supply LED | 24 V DC |
Product version number | V3.0.3 |
Monitoring of guard locking and the safety guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 3.7 x 10-9 |
Emergency stop | |
B10D | |
Emergency stop | 0,065 x 106 |
Mission time | 20 y |
Housing material | Reinforced plastic, die-cast zinc nickel-plated, stainless steel |
Weight | |
Net | 1,00 kg |
Ambient temperature | -20 ... 55 °C |
Degree of protection | IP65 |
Installation orientation | Door hinge DIN right |
Product version number | V3.0.0 |