We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
CET1-AR-CRA-AH-50X-SG-103418
Part number
103418
Stock availability:
On request
If you are looking for Euchner CET1-AR-CRA-AH-50X-SG-103418 103418, make contact with FAMAGA, the world's dominant retailer of streamlined equipment. Our company has lasted for more than ten years - these are cycles of experience, which are represented in the quality of spare parts and particular attention to each consumer. We praise everyone, who worked with us - thus, our regular purchasers obtain the most desirable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 4500 such purchasers, and we constantly sign new agreements. More than 700 purchases are terminated per day, because FAMAGA supplies all over the globe Germany, United Kingdom, Lesotho, Palestine, Turkmenistan, Colombia, Angola, Eswatini, Cameroon, Honduras, North Korea, Lebanon, Ecuador, Singapore, Czech Republic, El Salvador, Bulgaria, Greece, Ukraine, Denmark, Malta, Burundi, Malawi, Panama, Comoros, Zambia, Iceland, Kazakhstan, Norway, Hungary, Serbia, Tonga, Dominica, Mali, Kuwait, Uruguay, Slovakia, Senegal, Botswana, Brazil, Morocco, Laos, Iraq. A well-elaborated logistics link and a partnership network assist us to send our units anywhere in the earth on-time without damaging product quality.
A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of machine made streamlined equipment.
All merchandises from FAMAGA are affirmed - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been provided, and this bulk is amounting every day. We are glad that purchasers choose FAMAGA again and again, and we are eager to make more exceptional and technologically innovative industrial equipment so as keep on top of it.
To request or make a request, contact us or write to the online chat on our site. You can also dispatch a list of the needful equipment to the email of corporation - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
CET1 | Closed-circuit current principle, guard locking by spring force. Release by applying voltage to the guard locking solenoid. |
LED State | Status LED |
LED DIA | Diagnostic LED |
LED 1 rd | freely configurable |
LED 2 gn | freely configurable |
OUT | Monitoring output (semiconductor) |
RST | Reset input |
J | Teach-in input |
Housing material | |
Slide | Stainless steel |
Safety switch housing | Die-cast aluminum |
Weight | |
Net | 1 kg |
Ambient temperature | |
At UB = 24V DC | -20 ... 55 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Installation orientation | Any |
Degree of freedom | |
X | ±5 mm |
Y | ±5 mm |
Z | ±4 mm |
Ready delay | 10 s |
Switching frequency | max.0,5 Hz |
Connection | 2 plug connectors M12, 5 and 8-pin |
Approach speed | 20 m/min |
Guard locking principle | Closed-circuit current principle |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Operating voltage DC | |
UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
LED1, LED2 | 24 V DC -15% ... 10% |
Current consumption | |
IB | 80 mA |
ICM | 480 mA |
Utilization category according to EN 60947-5-2 | |
DC-13 | 24V 200mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
Fusing | |
External (operating voltage UB) | 0,25 ... 8 A |
External (operating voltage UCM) | 0,5 ... 8 A |
Power consumption | |
Solenoid | max.12 W |
EMC protection requirements | In acc. with EN IEC 60947-5-3 |
Solenoid duty cycle | 100 % |
Degree of contamination (external, according to EN 60947-1) | 3 |
Safety class | |
EN IEC 61140 | III |
Switching load | |
According to UL | 24V DC, class 2 |
Teach-in input J | |
Input voltage | |
High | 15 ... 27,6 V DC Teach-in input J |
Low | 0 ... 1 V DC Teach-in input J |
Monitoring output OUT | |
Type of output | Semiconductor output, p-switching, short circuit-proof |
Output voltage | |
OUT | 0,8xUB ... UB V DC |
Output current | |
OUT | 1 ... 50 mA |
Safety outputs OA/OB | |
Type of output | Semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
High U(OA,OB) | UB-1,5V ... UB V DC |
Low U(OA,OB) | 0 ... 1 V DC |
Output current | |
per safety output | 1 ... 200 mA |
Off-state current Ir | max.0,25 mA |
Risk time according to EN 60947-5-3 | |
Single device | max.400 ms |
Delay per device | 5 ms |
Switch-on time | |
Safety outputs | 400 ms |
Discrepancy time | |
Both safety outputs | max.10 ms |
Repeat accuracy R | 10 % |
For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Monitoring of guard locking and the safety guard position | |
Category | |
Head upward | 3 |
Head downward or horizontal | 4 |
Performance Level | PL e |
PFHD | |
Head upward | 4.29 x 10-8 |
Head downward or horizontal | 3.1 x 10-9 |
Control of the guard locking | |
Category | Depending on external control of guard locking |
Performance Level | Depending on external control of guard locking |
PFHD | Depending on external control of guard locking |
Mission time | 20 y |