We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
If you are pursuing Euchner GSBF02D08-552-M 085983, communicate with FAMAGA, the world's key vendor of mechanized equipment. Our company has lasted for more than ten years - these are years of experience, which are depicted in the quality of outcomes and special attention to each consumer. We cherish everyone, who worked with us - so, our regular buyers obtain the most helpful purchase forms and discounts on the factory-made equipment market. Nowadays, there are more than 4000 such clients, and we constantly compose new agreements. More than 600 agreements are achieved per day, because FAMAGA operates all over the earth Germany, United Kingdom, Uganda, Venezuela, Suriname, Albania, Romania, Cuba, Central African Republic, Turkmenistan, Cape Verde, Malta, Peru, Netherlands, Estonia, Monaco, Eritrea, Oman, Sierra Leone, Bosnia and Herzegovina, Haiti, Australia, Tunisia, Libya, Pakistan, Costa Rica, Tajikistan, Poland, Georgia, Guyana, Andorra, Seychelles, Macedonia, Angola, Sudan, Brunei, Malaysia, Mauritania, Comoros, Zambia, Mexico, Samoa, Egypt, East Timor, Guatemala, Vietnam. A advanced logistics connection and a partnership network cheer us to conduct our elements anywhere in the world quickly without discrediting product quality.
A particular source of good name for FAMAGA is its workers, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the direction of industrial equipment.
All spare parts from FAMAGA are assured - we are responsible for the outcome of our work. At this moment, more than 10 million units of products have been shipped, and this amount is rising every day. We are proud that users choose FAMAGA again and again, and we are pleased to make more developed and technologically innovative industrial equipment so as not to lower the bar.
To inquire or place an order, phone us or write a message to the online chat on our official website. You can also forward a list of the required equipment to the email of firm - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
ES 552 | Snap-action switching contact 1 changeover contact standard switching element |
Design | Upright |
Housing material | Sand-cast aluminum, anodized |
Weight | |
Net | 0,65 kg |
Ambient temperature | -5 ... 80 °C |
Degree of protection | IP67 |
Mechanical life | 10 x 106 |
Contact material | Silver alloy, electro-gold-plated |
Switching principle | Snap-action switching contact |
Plunger spacing | 8 mm |
Installation orientation | Any |
Tightening torque | |
Screw terminal switching element | max.0,2 Nm Hexagon socket AF 1.3 mm |
Number of switching elements | 2 |
Number of changeover contacts | 2 |
Connection | |
3 x | M20 x 1.5 |
Approach speed | |
max. | 0,01 ... 20 m/min |
Actuating element | Chisel plunger |
Actuating force | min.15 N |
Thermal rated current Ith | 6 A |
Utilization category according to EN 60947-5-1 | |
AC-15 | 2A 230V |
DC-13 | 2A 24V |
Short circuit protection according to IEC 60269-1 | |
(Fuse) | 6A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching current | |
Min. at DC 24V | min.10 mA |
Connection cross-section | 0,14 ... 1,0 mm? |