We are not the manufacturer, authorised distributor or authorised representative of the Euchner brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Euchner
Country
Germany
Name
TX2C-A024M
Part number
082928
Description
SCHALTER, ENDPLATTE; ART ELEKTROMECHANISCHE, BEZEICHNUNG TX2C-A024M, SPANNUNG 230 V~
Stock availability:
On request
If you are looking for Euchner TX2C-A024M 082928, contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has existed for more than ten years - these are ages of experience, which are illustrated in the quality of items and private attention to each client. We appreciate everyone, who collaborated with us - so, our regular consumers receive the most favorable purchase terms and discounts on the factory-made equipment market. Today, there are more than 4000 such purchasers, and we constantly make new agreements. More than 600 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Lithuania, Finland, Nicaragua, Kazakhstan, Samoa, Oman, Tajikistan, Angola, Honduras, Panama, Chad, Iraq, Colombia, Sierra Leone, Burkina Faso, Malaysia, Netherlands, Algeria, Bosnia and Herzegovina, Uruguay, Tonga, South Korea, Bulgaria, Mauritania, Turkmenistan, Swaziland, Togo, Qatar, Laos, Dominica, Niger, Cape Verde, Cyprus, Benin, Syria, El Salvador, Turkey, Jamaica, Morocco, Haiti, Zambia, Zimbabwe, Afghanistan. A well-built logistics chains and a partnership network guide us to ship our items anywhere in the globe immediately without disreputing product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of factory-made equipment.
All items from FAMAGA are verified - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this amount is ascending every day. We are proud that consumers choose FAMAGA again and again, and we are happy to make more developed and technologically modern industrial equipment so as not to lower the bar.
To request or book, phone us or send a message to the online chat on our official website. You can also send a list of the desirable equipment to the email of firm - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
TX2 | Open-circuit current principle, guard locking by applying voltage to the solenoid. Release by spring force. |
ETX C | Slow-action switching contact 2 NC / 1 NO + 1 NO (door monitoring contact) |
Housing material | Die-cast alloy, cathodically dipped |
Weight | |
Net | 0,8 kg |
Ambient temperature | -20 ... 80 °C |
Degree of protection | IP67 |
Mechanical life | 1 x 106 |
Contact material | Silver alloy, gold flashed |
Switching principle | Slow-action switching contact |
Installation orientation | Any |
Number of door position NO contacts | 1 |
Number of guard lock monitoring positively driven contacts | 2 |
Number of guard lock monitoring NO contacts | 1 |
Connection | |
3 x | M20 x 1.5 |
Approach speed | |
max. | 20 m/min |
Actuation frequency | 1200 1/h |
Guard locking principle | Open-circuit current principle |
Locking force Fmax | 1700 N |
Locking force FZh | 1300 N |
Retention force | 20 N |
Extraction force | 35 N |
Actuating force | 35 N |
Insertion depth | min.32 mm |
Thermal rated current Ith | 4 A |
Utilization category according to EN 60947-5-1 | |
AC-15 | 4A 230V |
DC-13 | 4A 24V |
Solenoid operating voltage | |
AC/DC | 24 V -15% ... +10% |
Short circuit protection according to IEC 60269-1 | |
(Fuse) | 4A gG |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 2,5 kV |
Switching voltage | |
Min. at 10mA | 12 V |
Switching current | |
Min. at 24V | 1 mA |
Power consumption | 8 W |
Solenoid duty cycle | 100 % |
Connection cross-section | 0,34 ... 1,5 mm? |
LED indicator | Operating voltage corresponds to the solenoid voltage |
Monitoring of guard locking and the safety guard position | |
B10D | 6 x 106 |
Overtravel | 1 mm |
Overtravel | 8 mm |