Ball valve  END-Armaturen ZA65-EE63
Ball valve  END-Armaturen ZA65-EE63

We are not the manufacturer, authorised distributor or authorised representative of the END-Armaturen brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

ZA65-EE63 END-Armaturen Ball valve

Manufacturer

END-Armaturen

Country

Germany

Part number

ZA65-EE63

Category

Coupling ball valves

Type

Ball valve

Description

Kugelhahn ZA DN32, mit Antrieb EE63 Edelstahl/PTFE-FKM, federrückstellend

Stock availability:

In stock

235 €

Need cheaper?

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications ZA65-EE63

If you are inspecting END-Armaturen ZA65-EE63, call FAMAGA, the world's major provider of industrialized equipment. Our company has worked for more than ten years - these are ages of experience, which are portrayed in the quality of spare parts and particular attention to each customer. We admire everyone, who liased with us - thus, our regular consumers obtain the most convenient purchase terms and discounts on the industrial equipment market. Now, there are more than 4000 such purchasers, and we constantly make new agreements. More than 750 affairs are settled per day, because FAMAGA supplies all over the world . A well-shaped logistics chains and a partnership network help us to conduct our products anywhere in the world with no delay without undermining product quality.

A special source of dignity for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only specialists, who already have experience in the range of machine made streamlined equipment.

All goods from FAMAGA are ensured - we are responsible for the aftereffect of our work. At the moment, more than 10 million units of products have been provided, and this number is amounting every day. We are pleased that users choose FAMAGA again and again, and we are pleased to make more progressive and technologically developed industrial equipment so as stay in control.

To get some advice or order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.

Features ZA65-EE63

2-way stainless steel ball valve for shut-off of inert gases and liquids. The body is made of a three-part screwed body construction with full cylindrical bore. Due to the self-adjusting, multi-part stem seal, the ball valve is maintenance-free. The ball valve is stamped conform to AD approval and has a fire-safe certification and an anti-static device. A TA-Luft approval is in preparation. The mounting plate according to ISO 5211 enables a direct or distanced mounting of the pneumatic actuators, resulting in an extremely compact and functional unit. Due to the twin-piston system the force developed by the counter-running pistons is transmitted to one common pinion via two tooth racks solidly connected with the pistons. This principle ensures a linear torque transmission along the entire stroke. The function of this ball valve actuator unit is pneumatically double-acting. Further information can be found in our technical portal. The actuator is completely assembled in our factory, adjusted and subjected to a functional test before delivery. Features:
  • Mounting pad for actuator with two scribed circles
  • Simple, standardized assembly of extensions, signal transmitters or control devices conform with EN 12116 (ISO5211)
  • Stem seals with spring washer set and lock plate, maintenance free
  • Body parts with centering grooved and tongued, for ease assembly (e.g. after welding)
For higher temperatures above +80°C please refer to the Pressure-Temperature-Diagram in the data sheet. The ball valve is available in many variants and designs and can be ordered online in our shop:
  • two sides female threaded connection
  • two sides welded connection
  • cavity-free sealing system
  • Temperature version with pressure compensation bore and ball seals with reinforced carbon fibre
  • direct mounted limit switches and solenoid valves
For the use of the ball valve in explosive atmospheres according to Directive 2014/34/EU, a special ATEX version is also available.
SKU ZA65-EE63
Description Ball valve DN32 ZA-welding face, with drive EE63, Stainless steel / PTFE FKM, spring return
Weight [kg] 4.360000
Ball material Stainless steel
Nominal size DN032
Body material Stainless Steel
Function single acting
Body material Edelstahl
Seals material PTFE
Stem seals material PTFE/FKM/Graphit
Operation pneumatic - single acting
Connection type Welding Connection DIN3239
Connection size 32
Nominal pressure min. [bar] 0
Nominal pressure max. [bar] 16
Test pressure PT [bar] 24
Temperature range min. [°C] -20
Temperature range max. [°C] +80
Media temperature min. [°C] -30
Media temperature max. [°C] +120
Gehäusedesign 3-teilig