We are not the manufacturer, authorised distributor or authorised representative of the Baumer brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Baumer
Country
Germany
Name
MHGP 100
Type
Инкрементальный энкодер
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Baumer MHGP 100 , contact FAMAGA, the world's leading supplier of industrial equipment. Our company has existed for more than ten years - these are years of experience, which are expressed in the quality of products and particular attention to each client. We appreciate everyone, who cooperated with us - therefore, our regular purchasers receive the most favorable purchase conditions and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly arrange new agreements. More than 650 transactions are made per day, because FAMAGA operates all over the world Germany, United Kingdom, Tajikistan, Iceland, East Timor, Iraq, Namibia, Eritrea, Slovenia, The Gambia, Kazakhstan, Cyprus, Tanzania, Togo, Bolivia, Vietnam, Seychelles, Kuwait, Peru, Samoa, Japan, Eswatini, Luxembourg, Ukraine, Jamaica, Syria, Liechtenstein, Malta, Mauritius, Paraguay, Djibouti, Austria, Switzerland, Qatar, Estonia, Poland, Sweden, Costa Rica, Latvia, Zimbabwe, Mozambique, Benin, Nigeria. A well-shaped logistics system and a partnership network allow us to ship our goods anywhere in the world as soon as possible without damaging product quality.
A special source of repute for FAMAGA is its personnel, each of whom contributes to our work. We call into our team only professionals, who already have experience in the field of industrial equipment.
All products from FAMAGA are affirmed - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that customers choose FAMAGA again and again, and we are glad to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Технические данные — электрические параметры<\th> <\tr> | |
|---|---|
| Interference immunity<\td> | EN 61000-6-2<\td> <\tr> |
| Emitted interference<\td> | EN 61000-6-3<\td> <\tr> |
| Approval<\td> | CE<\td> <\tr> |
| Технические данные — электрические параметры (square-wave)<\th> <\tr> | |
| Voltage supply<\td> | 4.5…30 VDC<\td> <\tr> |
| Consumption w\o load<\td> | 160 mA<\td> <\tr> |
| Pulses per revolution<\td> | 64…131072<\td> <\tr> |
| Phase shift<\td> | 90° ±10°<\td> <\tr> |
| Scan ratio<\td> | 40…60 %<\td> <\tr> |
| Reference signal<\td> | Zero pulse, width 90°<\td> <\tr> |
| Sensing method<\td> | Magnetic<\td> <\tr> |
| Output frequency<\td> | 2 MHz<\td> <\tr> |
| Output signals<\td> | A+, B+, R+, A-, B-, R-<\td> <\tr> |
| Output stages<\td> | HTL TTL\RS422<\td> <\tr> |
| Технические данные — электрические параметры (sinewave)<\th> <\tr> | |
| Voltage supply<\td> | 4.5…30 VDC<\td> <\tr> |
| Consumption w\o load<\td> | 160 mA<\td> <\tr> |
| Sinewave cycles per turn<\td> | 64…8192<\td> <\tr> |
| Phase shift<\td> | 90° ±5°<\td> <\tr> |
| Reference signal<\td> | Zero pulse, width 90°<\td> <\tr> |
| Sensing method<\td> | Magnetic<\td> <\tr> |
| Output signals<\td> | A+, B+, R+, A-, B-, R-<\td> <\tr> |
| Output stages<\td> | SinCos 1 Vpp<\td> <\tr> |
| Difference of SinCos amplitude<\td> | 20 mV<\td> <\tr> |
| Harmonics typ.<\td> | -40 dB<\td> <\tr> |
| DC offset<\td> | 20 mV<\td> <\tr> |
| Bandwidth<\td> | 400 kHz (-3 dB)<\td> <\tr> |
| Технические данные — механические параметры<\th> <\tr> | |
| Sensor head<\td> | FPGA signal processing<\td> <\tr> |
| Size (flange)<\td> | 99,9 mm<\td> <\tr> |
| Axial tolerance<\td> | ±3 mm (wheel\head)<\td> <\tr> |
| Radial tolerance<\td> | 0.1…2.2 mm (wheel\head)<\td> <\tr> |
| Shaft type<\td> | 16…80 mm (through hollow shaft)<\td> <\tr> |
| Protection DIN EN 60529<\td> | IP 67 (head) IP 68 (wheel)<\td> <\tr> |
| Operating temperature<\td> | -20…+85 °C<\td> <\tr> |
| Operating speed<\td> | 8000 rpm<\td> <\tr> |
| Resistance<\td> | IEC 60068-2-6 Vibration 30 g, 55-2000 Hz IEC 60068-2-27 Shock 300 g, 2 ms<\td> <\tr> |
| Accuracy of magnetic measure<\td> | ±300 <\td> <\tr> |
| Connection<\td> | Flange connector M23, 12-pin<\td> <\tr> <\tbody> <\table>
Invite to the tender
Our Manager will contact you soon.
The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent
Send a requestWe will contact with you and answer to all your questions
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue
By ordering several items from us at once, you will significantly save on delivery!
Brands catalogue
Search
Something went wrong.
Something seems to have gone wrong. Try again later.
|
