We are not the manufacturer, authorised distributor or authorised representative of the Baumer brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Baumer
Country
Germany
Name
HOG 11 + ESL 93
Type
Инкрементальный энкодер
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are questing Baumer HOG 11 + ESL 93 , contact FAMAGA, the world's the best provider of manufacturing equipment. Our company has worked for more than ten years - these are ages of experience, which are expressed in the quality of products and individual attention to each buyer. We appreciate everyone, who collaborated with us - therefore, our regular clients get the most favorable purchase terms and discounts on the industrial equipment market. Today, there are more than 4000 such clients, and we constantly compose new agreements. More than 650 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, Nicaragua, Dominican Republic, Czech Republic, Peru, South Korea, Cyprus, Lithuania, Kuwait, Canada, Botswana, Uzbekistan, South Sudan, Jordan, Japan, Senegal, India, The Gambia, Moldova, Estonia, Paraguay, Bolivia, Andorra, Cape Verde, Rwanda, Costa Rica, Philippines, Togo, Dominica, Burundi, Suriname, The Bahamas, East Timor, Djibouti, Afghanistan, Madagascar, Ukraine, Panama, Mongolia, Comoros, Sudan, El Salvador, Turkey, Jamaica, Ghana, Belarus, Pakistan. A advanced logistics chains and a partnership network guide us to conduct our items anywhere in the world on-time without undermining product quality.
A specific source of good name for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been shipped, and this number is increasing every day. We are proud that consumers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To inquire or place an order, call us by phone or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
| Технические данные — электрические параметры (encoder)<\th> <\tr> | |
|---|---|
| Voltage supply<\td> | 9…30 VDC, 5 VDC ±5 %<\td> <\tr> |
| Consumption w\o load<\td> | 100 mA<\td> <\tr> |
| Pulses per revolution<\td> | 300…5000<\td> <\tr> |
| Phase shift<\td> | 90° ±20°<\td> <\tr> |
| Scan ratio<\td> | 40…60 %<\td> <\tr> |
| Reference signal<\td> | Zero pulse, width 90°<\td> <\tr> |
| Output frequency<\td> | 120 kHz 300 kHz (on request)<\td> <\tr> |
| Output signals<\td> | K1, K2, K0 + inverted Error output (only EMS)<\td> <\tr> |
| Output stages<\td> | HTL-P (power linedriver) TTL\RS422<\td> <\tr> |
| Sensing method<\td> | Optical<\td> <\tr> |
| Технические данные — электрические параметры (speed switches)<\th> <\tr> | |
| Voltage supply<\td> | 12 VDC ±10 %<\td> <\tr> |
| Consumption w\o load<\td> | 5 mA<\td> <\tr> |
| Switching accuracy<\td> | ±4 % ( 1500 rpm) ±2 % (>1500 rpm)<\td> <\tr> |
| Switching hysteresis<\td> | 30 % of switching speed<\td> <\tr> |
| Switching outputs<\td> | 3 outputs, speed control<\td> <\tr> |
| Current each output<\td> | 40 mA<\td> <\tr> |
| Switching delay time<\td> | 40 ms<\td> <\tr> |
| Технические данные — механические параметры<\th> <\tr> | |
| Size (flange)<\td> | 105 mm<\td> <\tr> |
| Shaft type<\td> | 12…20 mm (blind hollow shaft) 17 mm (cone shaft 1:10)<\td> <\tr> |
| Shaft loading<\td> | 450 N axial 600 N radial<\td> <\tr> |
| Protection DIN EN 60529<\td> | IP 67<\td> <\tr> |
| Operating speed<\td> | 5000 rpm<\td> <\tr> |
| Range of switching speed (ns)<\td> | 3x 200…5000 rpm<\td> <\tr> |
| Operating torque typ.<\td> | 6 Ncm<\td> <\tr> |
| Rotor moment of inertia<\td> | 680 gcm <\td> <\tr> |
| Materials<\td> | Housing: aluminium die-cast Shaft: stainless steel<\td> <\tr> |
| Operating temperature<\td> | -20…+85 °C<\td> <\tr> |
| Resistance<\td> | IEC 60068-2-6 Vibration 5 g, 10-2000 Hz IEC 60068-2-27 Shock 50 g, 6 ms<\td> <\tr> |
| Shaft insulation<\td> | 2.8 kV<\td> <\tr> |
| Transmission length<\td> | 350 m at 100 kHz (HTL-P) 550 m at 100 kHz (TTL)<\td> <\tr> |
| Connection<\td> | 2x terminal box 3x terminal box (with option M)<\td> <\tr> |
| Weight approx.<\td> | 2.3 kg 2.5 kg (with option M)<\td> <\tr> |
| Interference immunity<\td> | EN 61000-6-2<\td> <\tr> |
| Emitted interference<\td> | EN 61000-6-3<\td> <\tr> |
| Approval<\td> | CE<\td> <\tr> <\tbody> <\table>
Invite to the tender
Our Manager will contact you soon.
The request has been sent
The request has been sent
The message hasn't been sent
The message hasn't been sent
Send a requestWe will contact with you and answer to all your questions
Thank you for your request!
While we are processing your request you can find other required goods. Indeed, there are more than 10 000 brands in our catalogue
By ordering several items from us at once, you will significantly save on delivery!
Brands catalogue
Search
Something went wrong.
Something seems to have gone wrong. Try again later.
|
