We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019800
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 12 mm |
Piston rod thread | M3 |
Standardization | ISO 15524 |
Stroke | 5 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R412019800, contact FAMAGA, the world's primary vendor of streamlined equipment. Our company has functioned for more than ten years - these are years of experience, which are illustrated in the quality of products and particular attention to each user. We value everyone, who conspired with us - so, our regular clients accept the most favorable purchase terms and discounts on the factory-made equipment market. At present, there are more than 3500 such buyers, and we constantly compose new agreements. More than 700 affairs are settled per day, because FAMAGA operates all over the planet Germany, United Kingdom, The Bahamas, Malaysia, Russia, Tonga, Singapore, Burkina Faso, Finland, Kiribati, Estonia, Azerbaijan, Belarus, Gambia, Panama, Burundi, Madagascar, Sierra Leone, Norway, Samoa, Afghanistan, Bulgaria, Comoros, Ireland, Eritrea, Monaco, Kyrgyzstan, Brazil, Rwanda, Zimbabwe, Iran, Guyana, Philippines, Albania, Jamaica, Bolivia, New Zealand, Denmark, Costa Rica, The Gambia, Egypt, Luxembourg, Benin, Uganda, Poland, South Korea, Nepal, Cape Verde. A well-elaborated logistics series and a partnership network assist us to conduct our items anywhere in the world on-time without undermining product quality.
A special source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the field of manufacturing equipment.
All spare parts from FAMAGA are verified - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that users choose FAMAGA again and again, and we are happy to make more developed and technologically developed industrial equipment so as stay in control.
To request or place an order, phone us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |