We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480144202
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R480144202, connect FAMAGA, the world's prime company of mechanized equipment. Our company has functioned for more than ten years - these are years of experience, which are described in the quality of merchandises and special attention to each user. We understand everyone, who engaged with us - thus, our regular clients procure the most desirable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4000 such consumers, and we constantly make new agreements. More than 750 transactions are made per day, because FAMAGA delivers all over the world Germany, United Kingdom, Paraguay, Uganda, Palestine, Japan, Nicaragua, Kenya, Mali, Ukraine, Turkmenistan, Bhutan, Slovakia, Montenegro, Iceland, Afghanistan, Chile, Guyana, Belize, Bulgaria, Iraq, Chad, Australia, Fiji, Zambia, Libya, Benin, Turkey, Ireland, Togo, Macedonia, Austria, Namibia, Poland, Costa Rica, Belarus, Armenia, Nigeria, Israel, Malta. A well-elaborated logistics series and a partnership network allow us to dispatch our units anywhere in the earth as soon as possible without disreputing product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to our work. We request into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this bulk is ascending every day. We are glad that customers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To consult or book, contact us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 2 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |