We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480193041
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Piston rod thread | M10x1,25 |
Standardization | ISO 15552 |
Stroke | 25 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480193041, reach FAMAGA, the world's prime vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are described in the quality of merchandises and individual attention to each buyer. We praise everyone, who joined with us - hence, our regular consumers get the most desirable purchase terms and discounts on the machine made streamlined equipment market. At present, there are more than 3500 such clients, and we constantly form new agreements. More than 750 affairs are settled per day, because FAMAGA delivers all over the world Germany, United Kingdom, Belgium, Nigeria, Hungary, Mexico, Dominica, Namibia, Dominican Republic, Honduras, Palestine, Bhutan, Mongolia, Gambia, Guinea, Slovakia, Andorra, Eswatini, Bulgaria, New Zealand, Tanzania, Algeria, Fiji, Zambia, Djibouti, South Korea, Bosnia and Herzegovina, Morocco, Syria, Jordan, Afghanistan, Ghana, Croatia, Equatorial Guinea, Cameroon, Kyrgyzstan, Argentina, Libya, Tonga, Uganda, Sudan, Kenya, Montenegro. A advanced logistics chains and a partnership network allow us to conduct our goods anywhere in the earth on-time without compromising product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to our work. We propose into our team only experts, who already have experience in the direction of factory-made equipment.
All outputs from FAMAGA are affirmed - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this amount is growing every day. We are glad that consumers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as keep on top of it.
To consult or order, get in touch with us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized Die-cast aluminum, anodized |
End cover | Aluminum, anodized Die-cast aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |