We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R414009650
Description
Housing | Die-cast aluminum,Steel |
Sealing material | Hydrogenated acrylonitrile butadiene rubber |
CE declaration of conformity | |
Protection class | IP65 |
Number of wires | 5-pin |
Port size | M12 |
Type | Plug |
Nominal flow Qn | 1300 l/min |
Hysteresis | < 0.015 bar |
DC operating voltage | 24 V |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) R414009650, communicate with FAMAGA, the world's the best distributor of mechanized equipment. Our company has functioned for more than ten years - these are cycles of experience, which are depicted in the quality of spare parts and particular attention to each buyer. We admire everyone, who engaged with us - hence, our regular consumers accept the most flexible purchase conditions and discounts on the industrial equipment market. Now, there are more than 3500 such clients, and we constantly make new agreements. More than 650 transactions are made per day, because FAMAGA supplies all over the world Germany, United Kingdom, Papua New Guinea, Azerbaijan, Zambia, Gambia, Guatemala, Hungary, Libya, Iceland, Japan, Myanmar, Czech Republic, Samoa, India, Sierra Leone, Canada, Benin, Mongolia, Saudi Arabia, Mozambique, Kuwait, Ecuador, Nigeria, Israel, Paraguay, Central African Republic, Argentina, Brazil, Costa Rica, Sudan, Mali, Cape Verde, Moldova, Iraq, Bulgaria, Swaziland, Malta, Poland. A well-built logistics network and a partnership network cheer us to dispatch our goods anywhere in the globe quickly without undermining product quality.
A specific source of dignity for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only professionals, who already have experience in the direction of industrial equipment.
All outputs from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this bulk is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as not to lower the bar.
To ask a question or make a request, call us by phone or send a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Version | Poppet valve |
Mounting orientation | α = 0 ... 90° ±β = 0 ... 90° |
Certificates | CE declaration of conformity |
Working pressure max | See table |
Ambient temperature min./max. | 5 ... 50 °C |
Medium temperature min./max. | 5 ... 50 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 1 mg/m³ |
Nominal flow Qn | 1300 l/min |
Control | Analog |
DC operating voltage | 24 V |
Voltage tolerance DC | -20% / +30% |
Permissible ripple | 5% |
Max. power consumption | 1400 mA |
Protection class | IP65 |
Weight | 2,05 kg |
Nominal flow Qn with working pressure 7 bar , with secondary pressure 6 bar and Δp = 0.2 bar |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
With oil-free, dry air, other installation positions are possible on request. The protection class is only ensured when the plug is mounted properly. For detailed information, see operating instructions. Minimum working pressure = 0.5 bar + max. required secondary pressure Additional pressure setting ranges available on request |
Material |
---|
Housing | Die-cast aluminum Steel |
Seals | Hydrogenated acrylonitrile butadiene rubber |