We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R402000314
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 10 mm |
Stroke | 10 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | M5 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) R402000314, get in touch with FAMAGA, the world's dominant distributor of machine made equipment. Our company has advanced for more than ten years - these are ages of experience, which are described in the quality of spare parts and special attention to each user. We appreciate everyone, who liased with us - therefore, our regular purchasers bring in the most helpful purchase forms and discounts on the industrial equipment market. At this moment, there are more than 4000 such purchasers, and we constantly compose new agreements. More than 750 agreements are achieved per day, because FAMAGA operates all over the globe Germany, United Kingdom, Nigeria, Tajikistan, Czech Republic, The Bahamas, Qatar, France, Kenya, Australia, Oman, Iran, Madagascar, Panama, Serbia, Sierra Leone, Turkmenistan, Antigua and Barbuda, Central African Republic, Slovakia, Liechtenstein, Bosnia and Herzegovina, Luxembourg, Nepal, Norway, Tonga, Chile, Laos, Paraguay, Iceland, Namibia, Zimbabwe, Philippines, Ghana, Comoros, Sudan, Ireland, Mongolia, Uruguay, Moldova. A well-built logistics bond and a partnership network allow us to send our goods anywhere in the world as soon as possible without disreputing product quality.
A specific source of good name for FAMAGA is its staff members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.
All merchandises from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that users choose FAMAGA again and again, and we are glad to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or book, get in touch with us or write a message to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |