We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822396907
Description
Piston rod modification | non-rotating,Optionally through (hollow) |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 63 mm |
Piston rod thread | M10 |
Standardization | NFE 49004 |
Stroke | 50 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822396907, reach FAMAGA, the world's top retailer of manufacturing equipment. Our company has lasted for more than ten years - these are ages of experience, which are described in the quality of merchandises and personalseparate attention to each buyer. We respect everyone, who collaborated with us - hence, our regular customers get the most convenient purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such buyers, and we constantly form new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Belgium, Dominican Republic, South Sudan, The Bahamas, Burundi, Panama, Turkmenistan, Equatorial Guinea, Nigeria, Latvia, South Korea, Syria, Saudi Arabia, Angola, Russia, Brazil, Nicaragua, Bosnia and Herzegovina, Albania, Serbia, Dominica, Suriname, Togo, Eswatini, Poland, Mali, Indonesia, Greece, Mauritania, Jordan, Haiti, Vietnam, Morocco, Swaziland, Seychelles, Guatemala, Libya, Georgia, Paraguay. A advanced logistics chains and a partnership network cheer us to deliver our items anywhere in the world quickly without disreputing product quality.
A particular source of dignity for FAMAGA is its staff members, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of manufacturing equipment.
All merchandises from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is growing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more progressive and technologically modern industrial equipment so as stay in control.
To ask a question or make a request, phone us or write a message to the online chat on our site. You can also forward a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Use our Internet configurator to order variants with an external thread. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |