We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822333452
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Piston rod thread | M8 |
Standardization | ISO 6432 |
Stroke | 25 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/8 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822333452, contact FAMAGA, the world's principle retailer of streamlined equipment. Our company has progressed for more than ten years - these are ages of experience, which are expressed in the quality of products and special attention to each purchaser. We admire everyone, who liased with us - so, our regular buyers accept the most favorable purchase conditions and discounts on the machine made streamlined equipment market. At this moment, there are more than 4500 such consumers, and we constantly sign new agreements. More than 600 contracts are concluded per day, because FAMAGA operates all over the world Germany, United Kingdom, Gambia, Macedonia, Kiribati, Latvia, France, Belgium, Australia, Cyprus, Brazil, United States, Uruguay, Pakistan, The Bahamas, Iceland, Serbia, Laos, Kenya, Sudan, Guyana, Bangladesh, Tanzania, Norway, Mauritius, Azerbaijan, Sweden, Namibia, Sierra Leone, Argentina, Ireland, Liechtenstein, Turkmenistan, Greece, Armenia, Lithuania, Israel, Tonga, Samoa, Malta, Mali, Cameroon, Bosnia and Herzegovina, Switzerland, Paraguay, Peru. A well-elaborated logistics connection and a partnership network assist us to dispatch our products anywhere in the planet with no delay without compromising product quality.
A special source of honor for FAMAGA is its employees, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the sphere of manufacturing equipment.
All spare parts from FAMAGA are guaranteed - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been provided, and this bulk is rising every day. We are happy that buyers choose FAMAGA again and again, and we strive to make more advanced and technologically modern industrial equipment so as not to lower the bar.
To request or book, phone us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -10 ... 120 °C |
Medium temperature min./max. | -10 ... 120 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Fluorocaoutchouc |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |