Aventics (brand of Emerson) 7472412344
  Aventics (brand of Emerson) 7472412344

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

7472412344 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

7472412344

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 125 mm
Piston rod thread M27x2
Standardization ISO 15552
Stroke 320 mm
Sealing material Polyurethane
Scraper Polyurethane
Compressed air connection G 1/2
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 7472412344

If you are looking for Aventics (brand of Emerson) 7472412344, get in touch with FAMAGA, the world's leading company of industrialized equipment. Our company has progressed for more than ten years - these are cycles of experience, which are expressed in the quality of outcomes and individual attention to each purchaser. We respect everyone, who cooperated with us - so, our regular consumers accept the most flexible purchase conditions and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such clients, and we constantly compose new agreements. More than 600 transactions are made per day, because FAMAGA supplies all over the globe . A well-built logistics connection and a partnership network let us to dispatch our units anywhere in the globe with no delay without disreputing product quality.

A particular source of good name for FAMAGA is its team members, each of whom contributes to common cause. We propose into our team only experts, who already have experience in the range of factory-made equipment.

All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been shipped, and this amount is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as keep on top of it.

To inquire or place an order, phone us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of firm - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 7472412344

Standards ISO 15552
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
NOTE:The orientation and position of the trunnion mounting in the center of the cylinder may not be changed!
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Trunnion mounting Nodular graphite iron, galvanized
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.