We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412012680
Description
Number of valve positions | 8 |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
Nominal flow Qn | 1500 l/min |
For series | TC15 |
Type | Manifold strip |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) R412012680, contact FAMAGA, the world's leading vendor of factory-made equipment. Our company has functioned for more than ten years - these are ages of experience, which are depicted in the quality of spare parts and personalseparate attention to each consumer. We praise everyone, who joined with us - so, our regular clients obtain the most convenient purchase forms and discounts on the industrial equipment market. At this time, there are more than 3500 such clients, and we constantly arrange new agreements. More than 700 contracts are concluded per day, because FAMAGA operates all over the globe Germany, United Kingdom, Eritrea, Iraq, Panama, Netherlands, Kenya, Lithuania, The Bahamas, Cape Verde, Australia, Hungary, Canada, Oman, South Korea, East Timor, Yemen, Cyprus, Djibouti, Monaco, Switzerland, The Gambia, Ireland, Nicaragua, Burundi, Afghanistan, Iran, Albania, Guatemala, Jamaica, Denmark, Brunei, Bulgaria, Qatar, Russia, China, Sierra Leone, El Salvador, Namibia, Bolivia, Peru, Nepal, Burkina Faso, Mozambique, Equatorial Guinea, Egypt, Serbia. A well-developed logistics bond and a partnership network allow us to conduct our products anywhere in the globe with no delay without discrediting product quality.
A particular source of pride for FAMAGA is its employees, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the range of manufacturing equipment.
All merchandises from FAMAGA are ensured - we are responsible for the outcome of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that buyers choose FAMAGA again and again, and we are eager to make more exceptional and technologically developed industrial equipment so as not to lower the bar.
To request or book, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Nominal flow Qn | 1500 l/min |
Ambient temperature min./max. | -10 ... 50 °C |
Medium | Compressed air |
Weight | See table |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |
Seal | Acrylonitrile butadiene rubber |