We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412012481
Description
Standardization | ISO 15407-2 |
Accessory type | type C |
Number of valve positions | 2 |
Frame size | 26 mm |
Sealing material | Acrylonitrile butadiene rubber |
Subbase | Aluminum |
For series | CD01-PI |
Type | Base plate for two single or double solenoid valves |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R412012481, call FAMAGA, the world's foremost producer of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are symbolized in the quality of merchandises and particular attention to each orderer. We value everyone, who engaged with us - therefore, our regular purchasers pick up the most flexible purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly compose new agreements. More than 650 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Honduras, Algeria, The Gambia, South Sudan, Netherlands, Italy, Iceland, Seychelles, Jamaica, Egypt, Burkina Faso, Switzerland, Sweden, Romania, Central African Republic, Qatar, Costa Rica, Tunisia, Nicaragua, Belarus, Guatemala, Eritrea, Benin, Chile, Croatia, Togo, Haiti, Belize, Thailand, Estonia, Luxembourg, Afghanistan, Tajikistan, Mexico, Brunei, United Arab Emirates, Russia, Andorra, Mozambique, Lithuania, United States, Nepal, Pakistan, Kiribati. A well-built logistics bond and a partnership network let us to conduct our products anywhere in the world on-time without damaging product quality.
A specific source of repute for FAMAGA is its team members, each of whom contributes to our work. We call into our team only experts, who already have experience in the sphere of industrial equipment.
All goods from FAMAGA are affirmed - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically modern industrial equipment so as to stay on the top.
To request or order, call us by phone or write a message to the online chat on our official website. You can also direct a list of the required equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15407-2 |
Compressed air connection | according to ISO 15407-2 |
Working pressure min./max. | -0,95 ... 16 bar |
Ambient temperature min./max. | -15 ... 50 °C |
Medium temperature min./max. | -5 ... 50 °C |
Medium | Compressed air |
Number of valve positions max. | 2 |
Grid dimension | 54 mm |
Exhaust type | Ports separated |
Mounting screw | with hexagon socket |
Tightening torque for mounting screws | 5 Nm |
The min. control pressure must be adhered to, since otherwise faulty switching and valve failure may result! The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Base plate | Aluminum |
Seal | Acrylonitrile butadiene rubber |