Aventics (brand of Emerson) 0822393006
  Aventics (brand of Emerson) 0822393006

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822393006 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822393006

Description

Piston rod modification Optionally through
Functional principle double-acting
Cushioning elastic
Magnetic piston with magnetic piston
Piston diameter 32 mm
Piston rod thread M8
Standardization NFE 49004
Stroke 40 mm
Sealing material Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/8
Compressed air connection type Internal thread
Temperature resistance Optionally heat-resistant

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822393006

If you are questing Aventics (brand of Emerson) 0822393006, connect FAMAGA, the world's main producer of machine made equipment. Our company has lasted for more than ten years - these are years of experience, which are described in the quality of merchandises and private attention to each consumer. We value everyone, who worked with us - therefore, our regular consumers pick up the most attractive purchase terms and discounts on the factory-made equipment market. At this moment, there are more than 4000 such consumers, and we constantly form new agreements. More than 600 contracts are concluded per day, because FAMAGA works all over the world . A well-elaborated logistics chains and a partnership network guide us to dispatch our products anywhere in the planet as soon as possible without discrediting product quality.

A special source of pride for FAMAGA is its team members, each of whom contributes to common cause. We request into our team only professionals, who already have experience in the field of factory-made equipment.

All outcomes from FAMAGA are verified - we are responsible for the aftereffect of our work. Now, more than 10 million units of products have been shipped, and this number is ascending every day. We are proud that buyers choose FAMAGA again and again, and we are glad to make more developed and technologically developed industrial equipment so as not to lower the bar.

To get some advice or place an order, phone us or send a message to the online chat on our site. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 0822393006

Standards NFE 49004
Certificates ATEX optional
Compressed air connection Internal thread
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Aluminum
End cover Aluminum
Seal Nitrile butadiene rubber Polyurethane
Scraper Polyurethane