We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822206406
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 160 mm |
Sealing material | Fluorocaoutchouc |
Scraper | Fluorocaoutchouc |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Heat resistant |
Stock availability:
On request
If you are questing Aventics (brand of Emerson) 0822206406, get in touch with FAMAGA, the world's foremost provider of streamlined equipment. Our company has progressed for more than ten years - these are years of experience, which are depicted in the quality of spare parts and particular attention to each buyer. We praise everyone, who conspired with us - thus, our regular consumers get the most favorable purchase terms and discounts on the machine made streamlined equipment market. At this moment, there are more than 3500 such consumers, and we constantly form new agreements. More than 650 affairs are settled per day, because FAMAGA delivers all over the globe Germany, United Kingdom, El Salvador, Mozambique, Finland, Guatemala, Togo, Iraq, Fiji, Azerbaijan, Belgium, Estonia, Vietnam, Swaziland, Ecuador, Morocco, Russia, The Bahamas, Hungary, Indonesia, Greece, Kuwait, Austria, Philippines, Brunei, Dominica, United States, Paraguay, Cape Verde, Ireland, Malaysia, Kiribati, Sierra Leone, Peru, Madagascar, Botswana, Burkina Faso, Georgia, Mauritius, North Korea, Argentina, South Korea, Zimbabwe, Seychelles, Slovakia. A well-elaborated logistics connection and a partnership network guide us to ship our items anywhere in the globe as soon as possible without discrediting product quality.
A special source of pride for FAMAGA is its personnel, each of whom contributes to our work. We invite into our team only professionals, who already have experience in the range of industrial equipment.
All items from FAMAGA are affirmed - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are pleased that purchasers choose FAMAGA again and again, and we strive to make more exceptional and technologically modern industrial equipment so as stay in control.
To get some advice or book, call us by phone or send a message to the online chat on our official website. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -10 ... 150 °C |
Medium temperature min./max. | -10 ... 150 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Fluorocaoutchouc |
Nut for piston rod | Steel, galvanized |
Scraper | Fluorocaoutchouc |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |