We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822064106
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 32 mm |
Stroke | 200 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are looking for Aventics (brand of Emerson) 0822064106, connect FAMAGA, the world's chief provider of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of merchandises and special attention to each buyer. We understand everyone, who engaged with us - therefore, our regular purchasers procure the most helpful purchase terms and discounts on the industrial equipment market. At this time, there are more than 4000 such purchasers, and we constantly sign new agreements. More than 750 affairs are settled per day, because FAMAGA operates all over the world Germany, United Kingdom, The Bahamas, Belarus, Eritrea, Zambia, Burkina Faso, Lithuania, Japan, Ireland, Guyana, Belize, Guinea, Kiribati, Sweden, Lebanon, Burundi, Malta, Malaysia, Ghana, Israel, Iraq, Uruguay, China, Liechtenstein, Kazakhstan, Indonesia, Slovakia, North Korea, United Arab Emirates, Montenegro, Comoros, Azerbaijan, Brunei, Uganda, Albania, Ukraine, Namibia, Sierra Leone, Australia, Algeria, Laos, Antigua and Barbuda, Sudan. A well-built logistics link and a partnership network allow us to send our items anywhere in the world promptly without disreputing product quality.
A particular source of honor for FAMAGA is its staff members, each of whom contributes to our work. We invite into our team only experts, who already have experience in the field of factory-made equipment.
All spare parts from FAMAGA are assured - we are responsible for the cause of our work. At the moment, more than 10 million units of products have been shipped, and this number is amounting every day. We are proud that buyers choose FAMAGA again and again, and we are pleased to make more advanced and technologically developed industrial equipment so as not to lower the bar.
To request or place an order, get in touch with us or send a message to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Steel, hardened |
Bearing | Steel, hardened |
Piston rod | Stainless steel |