We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
2719060300
Description
Functional principle | Single-acting, retracted without pressure |
Stroke | 26 mm |
Compressed air connection | G 1/8 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 2719060300, catch up with FAMAGA, the world's leading vendor of factory-made equipment. Our company has worked for more than ten years - these are ages of experience, which are outlined in the quality of products and private attention to each consumer. We value everyone, who joined with us - so, our regular clients procure the most acceptable purchase conditions and discounts on the industrial equipment market. Nowadays, there are more than 4000 such consumers, and we constantly compose new agreements. More than 600 affairs are settled per day, because FAMAGA works all over the world Germany, United Kingdom, Malaysia, Yemen, Georgia, Rwanda, Swaziland, Kyrgyzstan, Philippines, Latvia, Romania, Qatar, Myanmar, Norway, Moldova, Bhutan, Azerbaijan, Kenya, Armenia, Turkmenistan, Luxembourg, Sudan, Gambia, Thailand, Belize, Monaco, Ireland, Burundi, Denmark, Bangladesh, South Sudan, Costa Rica, Bulgaria, Nigeria, Finland, Equatorial Guinea, Sweden, Haiti, Tunisia, South Korea, Namibia, Paraguay, Tanzania, The Gambia, Eswatini, Israel, Macedonia, Panama. A well-built logistics bond and a partnership network assist us to deliver our goods anywhere in the world immediately without undermining product quality.
A special source of pride for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only professionals, who already have experience in the sphere of industrial equipment.
All outputs from FAMAGA are ensured - we are responsible for the aftereffect of our work. At this moment, more than 10 million units of products have been delivered, and this number is rising every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more developed and technologically developed industrial equipment so as to stay on the top.
To inquire or make a request, get in touch with us or write to the online chat on our official website. You can also direct a list of the required equipment to the email of organization - we will contact you ourselves with a made commercial proposal from FAMAGA.
Version | Flexible rolling bellow |
Functional principle | Single-acting, retracted without pressure |
Working pressure min./max. | See table |
Ambient temperature min./max. | -30 ... 90 °C |
Medium | Compressed air |
Permissible angle of tilt max. | 15 ° |
Pressure for determining forces | 6 bar |
Weight | See table |
Compliance with the minimum height H min. as well as the maximum height H max. must be ensured with end stops. Use at operating height ≥ Hmax: only permitted upon approval by AVENTICS Further information on vibration isolation can be found in the “Technical information” document (available in the MediaCentre). Rolling bellows cylinders may only be moved or pushed together under pressure, otherwise this can damage the bellows. | |
Reduced service life at a temperature greater than | 70 °C |
Material |
---|
Bellow | Chloroprene rubber |
Front cover | Polyamide fiber-glass reinforced |
End cover | Polyamide fiber-glass reinforced |
Piston | Polyamide fiber-glass reinforced |
clamping ring | Aluminum Steel |