We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480637945
Description
Piston rod modification | non-rotating, with front plate |
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 20 mm |
Standardization | ISO 15524 |
Stroke | 30 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Nitrile butadiene rubber |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480637945, communicate with FAMAGA, the world's the best company of streamlined equipment. Our company has existed for more than ten years - these are years of experience, which are illustrated in the quality of goods and particular attention to each customer. We cherish everyone, who collaborated with us - hence, our regular purchasers receive the most favorable purchase forms and discounts on the machine made streamlined equipment market. At this time, there are more than 3500 such buyers, and we constantly form new agreements. More than 750 contracts are concluded per day, because FAMAGA works all over the world Germany, United Kingdom, Togo, Syria, United Arab Emirates, Montenegro, East Timor, Bulgaria, Switzerland, Morocco, Fiji, Djibouti, Malawi, Iceland, Kyrgyzstan, Turkmenistan, Malta, Grenada, Mongolia, Mali, Tunisia, Benin, Eritrea, Jordan, Sudan, Tonga, Angola, Mozambique, Andorra, India, Gambia, Croatia, Azerbaijan, Central African Republic, Namibia, Egypt, Belize, Tajikistan, Antigua and Barbuda, Tanzania, Madagascar, Israel, Thailand, Nigeria, Panama, Armenia, Ghana, Zambia, Cape Verde. A advanced logistics chains and a partnership network let us to conduct our goods anywhere in the globe quickly without damaging product quality.
A special source of dignity for FAMAGA is its workers, each of whom contributes to our work. We call into our team only experts, who already have experience in the direction of factory-made equipment.
All outcomes from FAMAGA are affirmed - we are responsible for the result of our work. At the moment, more than 10 million units of products have been supplied, and this bulk is amounting every day. We are pleased that clients choose FAMAGA again and again, and we strive to make more progressive and technologically innovative industrial equipment so as to stay on the top.
To get some advice or book, contact us or write a message to the online chat on our official website. You can also forward a list of the desirable equipment to the email of organization - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15524 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Brass Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Front plate | Aluminum |
Guide rod | Stainless steel |
Scraper | Nitrile butadiene rubber Polyurethane |
See table for additional data on materials. |