We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R412019843
Description
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 40 mm |
| Piston rod thread | M8 |
| Standardization | ISO 15524 |
| Stroke | 10 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are inspecting Aventics (brand of Emerson) R412019843, communicate with FAMAGA, the world's major producer of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are outlined in the quality of products and personalseparate attention to each consumer. We cherish everyone, who liased with us - therefore, our regular consumers obtain the most desirable purchase conditions and discounts on the industrial equipment market. Today, there are more than 4000 such buyers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA works all over the globe Germany, United Kingdom, Venezuela, Dominican Republic, Zimbabwe, Canada, Sri Lanka, Niger, Italy, Oman, Nigeria, Afghanistan, Yemen, Monaco, Cameroon, Eritrea, Benin, Seychelles, Guinea, Mexico, Netherlands, Singapore, Brazil, Greece, Morocco, Bulgaria, East Timor, Turkmenistan, Sudan, Nepal, Paraguay, Djibouti, Peru, Mauritius, Dominica, Switzerland, Ecuador, Cyprus, Latvia, South Korea, Australia, Albania, Togo, Samoa, New Zealand, Mauritania, United States. A advanced logistics link and a partnership network guide us to send our goods anywhere in the world on-time without disreputing product quality.
A special source of pride for FAMAGA is its workers, each of whom contributes to our work. We accept into our team only specialists, who already have experience in the direction of industrial equipment.
All goods from FAMAGA are verified - we are responsible for the result of our work. Nowadays, more than 10 million units of products have been delivered, and this number is growing every day. We are proud that clients choose FAMAGA again and again, and we are happy to make more advanced and technologically innovative industrial equipment so as to stay on the top.
To consult or order, call us by phone or send a message to the online chat on our official website. You can also forward a list of the required equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
| Standards | ISO 15524 |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| Use our Internet configurator to order variants with an external thread. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Brass Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Nitrile butadiene rubber Polyurethane |
| See table for additional data on materials. |
