We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822492101
Description
Piston rod modification | Optionally heat-resistant |
Functional principle | Single-acting, extended without pressure |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 25 mm |
Piston rod thread | M6 |
Standardization | NFE 49004 |
Stroke | 10 mm |
Sealing material | Nitrile butadiene rubber |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822492101, catch up with FAMAGA, the world's principle supplier of industrial equipment. Our company has lasted for more than ten years - these are cycles of experience, which are described in the quality of merchandises and individual attention to each orderer. We praise everyone, who cooperated with us - therefore, our regular customers receive the most convenient purchase terms and discounts on the factory-made equipment market. At this time, there are more than 4 thousand such consumers, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the planet Germany, United Kingdom, Singapore, Russia, Croatia, Fiji, New Zealand, Libya, Dominican Republic, Burma, Switzerland, Lithuania, Panama, Swaziland, Haiti, El Salvador, North Korea, Tajikistan, Australia, Romania, Bulgaria, South Sudan, Philippines, Macedonia, Monaco, Malaysia, Jordan, Sierra Leone, South Korea, Afghanistan, Andorra, Mauritania, Armenia, United States, Belize, East Timor, Qatar, Latvia, Burkina Faso, Indonesia, United Arab Emirates, Sweden, Kuwait. A well-developed logistics system and a partnership network guide us to deliver our units anywhere in the world with no delay without undermining product quality.
A particular source of dignity for FAMAGA is its team members, each of whom contributes to our work. We accept into our team only experts, who already have experience in the sphere of manufacturing equipment.
All products from FAMAGA are verified - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are happy that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically modern industrial equipment so as stay in control.
To ask a question or order, phone us or write a message to the online chat on our site. You can also send a list of the desirable equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | NFE 49004 |
Compressed air connection | Internal thread |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 5 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum |
End cover | Aluminum |
Seal | Nitrile butadiene rubber Polyurethane |
Scraper | Polyurethane |