We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822393000
Description
| Piston rod modification | Optionally through |
| Functional principle | double-acting |
| Cushioning | elastic |
| Magnetic piston | with magnetic piston |
| Piston diameter | 32 mm |
| Piston rod thread | M8 |
| Standardization | NFE 49004 |
| Stroke | 5 mm |
| Sealing material | Polyurethane |
| Scraper | Polyurethane |
| ATEX optional | |
| Compressed air connection | G 1/8 |
| Compressed air connection type | Internal thread |
| Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
Price: On request
On request
Several positions are needed?
Send your request on email:
If you are looking for Aventics (brand of Emerson) 0822393000, reach FAMAGA, the world's principle supplier of mechanized equipment. Our company has operated for more than ten years - these are ages of experience, which are portrayed in the quality of items and particular attention to each orderer. We respect everyone, who liased with us - hence, our regular clients receive the most flexible purchase terms and discounts on the industrial equipment market. Nowadays, there are more than 4 thousand such purchasers, and we constantly make new agreements. More than 700 affairs are settled per day, because FAMAGA supplies all over the planet Germany, United Kingdom, Bulgaria, Netherlands, Samoa, Japan, Cape Verde, Chile, Madagascar, Moldova, Philippines, The Bahamas, Israel, Kyrgyzstan, Nigeria, Chad, Qatar, Uzbekistan, Finland, Laos, Eritrea, South Sudan, Comoros, Mexico, Haiti, Afghanistan, Equatorial Guinea, Poland, Yemen, Luxembourg, Mongolia, Libya, Dominica, Argentina, Pakistan, Indonesia, Peru, Armenia, Mauritania, Tunisia, Nepal, Australia. A well-shaped logistics network and a partnership network guide us to ship our goods anywhere in the planet immediately without disreputing product quality.
A specific source of repute for FAMAGA is its personnel, each of whom contributes to common cause. We call into our team only specialists, who already have experience in the range of industrial equipment.
All products from FAMAGA are ensured - we are responsible for the aftereffect of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are happy that clients choose FAMAGA again and again, and we are happy to make more exceptional and technologically developed industrial equipment so as keep on top of it.
To inquire or make a request, contact us or send a message to the online chat on our official website. You can also forward a list of the necessary equipment to the email of organization - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
| Standards | NFE 49004 |
| Certificates | ATEX optional |
| Compressed air connection | Internal thread |
| Ambient temperature min./max. | -20 ... 80 °C |
| Medium temperature min./max. | -20 ... 80 °C |
| Medium | Compressed air |
| Max. particle size | 50 µm |
| Oil content of compressed air | 0 ... 5 mg/m³ |
| Pressure for determining piston forces | 6.3 bar |
| The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
| ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is fluorocaoutchouc. Further options can be generated in the Internet configurator. |
| Material |
|---|
| Cylinder tube | Aluminum, anodized |
| Piston rod | Stainless steel |
| Front cover | Aluminum |
| End cover | Aluminum |
| Seal | Nitrile butadiene rubber Polyurethane |
| Scraper | Polyurethane |
