We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822332511
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 16 mm |
Piston rod thread | M6 |
Standardization | ISO 6432 |
Stroke | 400 mm |
Sealing material | Acrylonitrile butadiene rubber,Polyurethane |
Scraper | Polyurethane |
Compressed air connection | M5 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) 0822332511, call FAMAGA, the world's dominant company of machine made equipment. Our company has progressed for more than ten years - these are cycles of experience, which are illustrated in the quality of spare parts and individual attention to each consumer. We value everyone, who engaged with us - thus, our regular clients accept the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 4 thousand such buyers, and we constantly arrange new agreements. More than 750 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, New Zealand, Fiji, Guinea-Bissau, Guatemala, South Sudan, Finland, Libya, Nepal, Israel, United Arab Emirates, El Salvador, Austria, Ghana, Greece, Azerbaijan, Bolivia, Burundi, Ireland, Argentina, Jamaica, Uzbekistan, Brunei, The Bahamas, Yemen, Liechtenstein, Swaziland, Nicaragua, Latvia, Sweden, Pakistan, Namibia, Bulgaria, Zimbabwe, Hungary, Egypt, Morocco, Benin, Lithuania, Seychelles, Denmark, East Timor, Sudan. A advanced logistics bond and a partnership network assist us to send our items anywhere in the earth immediately without damaging product quality.
A specific source of good name for FAMAGA is its team members, each of whom contributes to common cause. We invite into our team only specialists, who already have experience in the direction of machine made streamlined equipment.
All spare parts from FAMAGA are affirmed - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is amounting every day. We are glad that clients choose FAMAGA again and again, and we are glad to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To get some advice or order, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 6432 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1 ... 10 bar |
Ambient temperature min./max. | -25 ... 80 °C |
Medium temperature min./max. | -25 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Clamping piece for magnetic field sensor necessary |
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C. |
Material |
---|
Cylinder tube | Stainless steel |
Piston rod | Stainless steel |
Piston | Brass, Aluminum |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Seal | Acrylonitrile butadiene rubber Polyurethane |
Nut for cylinder mounting | Steel, galvanized |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |