Aventics (brand of Emerson) 0822232010
  Aventics (brand of Emerson) 0822232010

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822232010 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822232010

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Piston diameter 16 mm
Piston rod thread M6
Standardization ISO 6432
Stroke 320 mm
Sealing material Acrylonitrile butadiene rubber,Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection M5
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822232010

If you are questing Aventics (brand of Emerson) 0822232010, communicate with FAMAGA, the world's major company of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are described in the quality of products and special attention to each orderer. We appreciate everyone, who liased with us - therefore, our regular consumers accept the most favorable purchase conditions and discounts on the industrial equipment market. At this time, there are more than 4000 such consumers, and we constantly form new agreements. More than 650 purchases are terminated per day, because FAMAGA operates all over the world . A well-elaborated logistics series and a partnership network help us to send our elements anywhere in the world promptly without discrediting product quality.

A particular source of pride for FAMAGA is its staff members, each of whom contributes to common cause. We invite into our team only experts, who already have experience in the field of factory-made equipment.

All outputs from FAMAGA are assured - we are responsible for the result of our work. At the moment, more than 10 million units of products have been shipped, and this number is ascending every day. We are glad that purchasers choose FAMAGA again and again, and we are happy to make more advanced and technologically developed industrial equipment so as not to lower the bar.

To get some advice or make a request, call us by phone or write to the online chat on our official website. You can also send a list of the required equipment to the email of corporation - we will contact you ourselves with a made commercial proposal from FAMAGA.

Features 0822232010

Standards ISO 6432
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1 ... 10 bar
Ambient temperature min./max. -25 ... 80 °C
Medium temperature min./max. -25 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
Weight See table
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Stainless steel
Piston rod Stainless steel
Piston Brass, Aluminum
Front cover Aluminum, anodized
End cover Aluminum, anodized
Seal Acrylonitrile butadiene rubber Polyurethane
Nut for cylinder mounting Steel, galvanized
Nut for piston rod Steel, galvanized
Scraper Polyurethane