We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
R480060082
Description
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 125 mm |
Piston rod thread | M27x2 |
Standardization | ISO 15552 |
Stroke | 80 mm |
Scraper | Polyester |
ATEX optional | |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Temperature resistance | Optionally heat-resistant |
Stock availability:
On request
If you are pursuing Aventics (brand of Emerson) R480060082, contact FAMAGA, the world's influential provider of machine made equipment. Our company has operated for more than ten years - these are cycles of experience, which are described in the quality of products and individual attention to each buyer. We praise everyone, who engaged with us - therefore, our regular clients accept the most desirable purchase conditions and discounts on the machine made streamlined equipment market. Today, there are more than 4000 such clients, and we constantly arrange new agreements. More than 700 transactions are made per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Burma, Mongolia, Rwanda, Iraq, Namibia, Portugal, Palestine, Sierra Leone, Bahamas, Azerbaijan, Denmark, Liechtenstein, Andorra, Lithuania, Uruguay, Oman, Jordan, Morocco, Uzbekistan, Kenya, Japan, Paraguay, Czech Republic, Equatorial Guinea, Gambia, Nicaragua, East Timor, Chile, Ecuador, Uganda, North Korea, Senegal, Bulgaria, Tunisia, Montenegro, Kazakhstan, Algeria, Brazil, Armenia, Serbia. A well-shaped logistics connection and a partnership network let us to conduct our goods anywhere in the globe on-time without damaging product quality.
A particular source of repute for FAMAGA is its workers, each of whom contributes to our work. We propose into our team only specialists, who already have experience in the field of factory-made equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Nowadays, more than 10 million units of products have been supplied, and this number is increasing every day. We are proud that purchasers choose FAMAGA again and again, and we are happy to make more exceptional and technologically modern industrial equipment so as not to lower the bar.
To inquire or place an order, contact us or write to the online chat on our official website. You can also dispatch a list of the required equipment to the email of corporation - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.
Standards | ISO 15552 |
Certificates | ATEX optional |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . Ø25 not according to ISO 15552 The material for heat-resistant scraper and seal variants (ambient temperature: -10 °C ... 120 °C) is PTFE. |
Further options can be generated in the Internet configurator. ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. Ø25 not according to ISO 15552 |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Aluminum, anodized |
End cover | Aluminum, anodized |
Scraper | Polyester |
Tie-rods | Stainless steel |