We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822066005
Description
Functional principle | double-acting |
Cushioning | elastic |
Magnetic piston | with magnetic piston |
Piston diameter | 50 mm |
Stroke | 160 mm |
Housing | Aluminum |
Sealing material | Polyurethane |
Compressed air connection | G 1/4 |
Stock availability:
On request
If you are inspecting Aventics (brand of Emerson) 0822066005, call FAMAGA, the world's key producer of industrialized equipment. Our company has advanced for more than ten years - these are cycles of experience, which are symbolized in the quality of spare parts and individual attention to each customer. We praise everyone, who conspired with us - so, our regular clients obtain the most desirable purchase forms and discounts on the industrial equipment market. Nowadays, there are more than 3500 such clients, and we constantly form new agreements. More than 700 proceedings are resolved per day, because FAMAGA works all over the globe Germany, United Kingdom, Burundi, Poland, Uruguay, Zimbabwe, Oman, Senegal, South Sudan, Vietnam, Uganda, Iceland, Slovenia, El Salvador, Netherlands, Hungary, Morocco, Paraguay, Russia, Brazil, Kenya, Indonesia, Nigeria, Albania, Cyprus, Moldova, Mauritania, Togo, Namibia, Malaysia, Mozambique, Ireland, Yemen, Bulgaria, Samoa, Finland, Mexico, Bolivia, Georgia, North Korea. A advanced logistics link and a partnership network let us to send our goods anywhere in the globe as soon as possible without compromising product quality.
A particular source of honor for FAMAGA is its personnel, each of whom contributes to our work. We propose into our team only experts, who already have experience in the range of industrial equipment.
All items from FAMAGA are ensured - we are responsible for the cause of our work. Nowadays, more than 10 million units of products have been supplied, and this number is amounting every day. We are pleased that customers choose FAMAGA again and again, and we strive to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To inquire or book, contact us or write a message to the online chat on our official website. You can also direct a list of the desirable equipment to the email of corporation - we will contact you ourselves with a prepared commercial proposal from FAMAGA.
Working pressure min./max. | See table |
Ambient temperature min./max. | -10 ... 70 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
Weight | See table |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Note: Only the Ø10 variants fits to sensor series ST4. The sensor series ST6 and SN3 can be used for all other Ø variants. |
Material |
---|
Housing | Aluminum, anodized |
Seal | Polyurethane |
Front plate | Steel, galvanized |
Guide rod | Stainless steel |
Bearing | Sintered bronze |
Piston rod | Stainless steel |