Aventics (brand of Emerson) 0822306204
  Aventics (brand of Emerson) 0822306204

We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.

0822306204 Aventics (brand of Emerson)

Manufacturer

Aventics (brand of Emerson)

Country

Germany

Part number

0822306204

Description

Functional principle double-acting
Cushioning pneumatically
adjustable
Magnetic piston with magnetic piston
Piston diameter 125 mm
Piston rod thread M27x2
Standardization ISO 15552
Stroke 100 mm
Sealing material Polyurethane
Scraper Polyurethane
ATEX optional
Compressed air connection G 1/2
Compressed air connection type Internal thread

Stock availability:

On request

Price: On request

Order

Several positions are needed?

Send your request on email:

Worldwide delivery services:
fedex dhl ups
Ways of payment:
wire transfer paypal

Specifications 0822306204

If you are questing Aventics (brand of Emerson) 0822306204, contact FAMAGA, the world's key company of machine made equipment. Our company has lasted for more than ten years - these are ages of experience, which are depicted in the quality of products and special attention to each orderer. We cherish everyone, who worked with us - thus, our regular consumers accept the most desirable purchase forms and discounts on the manufacturing equipment market. Today, there are more than 3500 such consumers, and we constantly arrange new agreements. More than 700 proceedings are resolved per day, because FAMAGA supplies all over the globe . A well-elaborated logistics chains and a partnership network allow us to send our units anywhere in the earth on-time without discrediting product quality.

A specific source of repute for FAMAGA is its staff members, each of whom contributes to our work. We request into our team only specialists, who already have experience in the range of industrial equipment.

All outputs from FAMAGA are assured - we are responsible for the cause of our work. At this moment, more than 10 million units of products have been supplied, and this bulk is ascending every day. We are proud that consumers choose FAMAGA again and again, and we strive to make more progressive and technologically modern industrial equipment so as stay in control.

To get some advice or place an order, contact us or write a message to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a ready-made commercial proposal from FAMAGA.

Features 0822306204

Standards ISO 15552
Certificates ATEX optional
Compressed air connection Internal thread
Working pressure min./max. 1,5 ... 10 bar
Ambient temperature min./max. -20 ... 80 °C
Medium temperature min./max. -20 ... 80 °C
Medium Compressed air
Max. particle size 50 µm
Oil content of compressed air 0 ... 5 mg/m³
Pressure for determining piston forces 6.3 bar
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre).
ATEX-certified cylinders with identification II 2G Ex h IIB T4 Gb / II 2D Ex h IIIB T135°C Db_X can be generated in the Internet configurator. The operating temperature range for ATEX-certified cylinders is -20 °C ... 50 °C.
Material
Cylinder tube Aluminum, anodized
Piston rod Stainless steel
Front cover Die-cast aluminum
End cover Die-cast aluminum
Seal Polyurethane
Nut for piston rod Steel, galvanized
Scraper Polyurethane
Tie-rods Stainless steel Steel, galvanized
See table for additional data on materials.