We are not the manufacturer, authorised distributor or authorised representative of the Aventics (brand of Emerson) brand Worldwide. The private labels and part numbers shown on this website are the property of their respective owners.
Manufacturer
Aventics (brand of Emerson)
Country
Germany
Part number
0822345511
Description
Piston rod modification | through |
Functional principle | double-acting |
Cushioning | pneumatically |
adjustable | |
Magnetic piston | with magnetic piston |
Piston diameter | 100 mm |
Piston rod thread | M20x1,5 |
Standardization | ISO 15552 |
Stroke | 500 mm |
Sealing material | Polyurethane |
Scraper | Polyurethane |
Compressed air connection | G 1/2 |
Compressed air connection type | Internal thread |
Stock availability:
On request
If you are seeking Aventics (brand of Emerson) 0822345511, call FAMAGA, the world's main supplier of industrial equipment. Our company has operated for more than ten years - these are cycles of experience, which are illustrated in the quality of spare parts and personalseparate attention to each purchaser. We value everyone, who cooperated with us - so, our regular buyers bring in the most flexible purchase terms and discounts on the industrial equipment market. At present, there are more than 4 thousand such consumers, and we constantly make new agreements. More than 650 agreements are achieved per day, because FAMAGA delivers all over the globe Germany, United Kingdom, Tajikistan, Panama, Mexico, Sierra Leone, Chile, Georgia, Colombia, Zambia, Namibia, Japan, United Arab Emirates, Iran, Eritrea, Iraq, Equatorial Guinea, Oman, Kyrgyzstan, Costa Rica, Thailand, Vietnam, Liechtenstein, Swaziland, Nicaragua, Suriname, Cameroon, Monaco, Djibouti, Lithuania, Cyprus, Finland, The Gambia, Andorra, Afghanistan, Rwanda, East Timor, Israel, Belize, Madagascar, Bulgaria, Jamaica, Paraguay, Egypt, Mozambique. A well-developed logistics connection and a partnership network assist us to dispatch our products anywhere in the world immediately without undermining product quality.
A specific source of pride for FAMAGA is its personnel, each of whom contributes to common cause. We request into our team only specialists, who already have experience in the field of machine made streamlined equipment.
All outputs from FAMAGA are ensured - we are responsible for the outcome of our work. Now, more than 10 million units of products have been delivered, and this amount is ascending every day. We are proud that clients choose FAMAGA again and again, and we are pleased to make more exceptional and technologically developed industrial equipment so as to stay on the top.
To request or order, phone us or write to the online chat on our site. You can also dispatch a list of the desirable equipment to the email of our company - we will contact you ourselves with a worked out commercial proposal from FAMAGA.
Standards | ISO 15552 |
Compressed air connection | Internal thread |
Working pressure min./max. | 1,5 ... 10 bar |
Ambient temperature min./max. | -20 ... 80 °C |
Medium temperature min./max. | -20 ... 80 °C |
Medium | Compressed air |
Max. particle size | 50 µm |
Oil content of compressed air | 0 ... 5 mg/m³ |
Pressure for determining piston forces | 6.3 bar |
The pressure dew point must be at least 15 °C under ambient and medium temperature and may not exceed 3 °C . The oil content of compressed air must remain constant during the life cycle. Use only the approved oils from AVENTICS. Further information can be found in the “Technical information” document (available in the MediaCentre). |
Material |
---|
Cylinder tube | Aluminum, anodized |
Piston rod | Stainless steel |
Front cover | Die-cast aluminum |
End cover | Die-cast aluminum |
Seal | Polyurethane |
Nut for piston rod | Steel, galvanized |
Scraper | Polyurethane |
Tie-rods | Stainless steel Steel, galvanized |
See table for additional data on materials. |